Mazak Integrex 200 Y (2000) CNC High Power Turning Centre & Full Function Machining Centre.
Lot 2: Mazak Integrex 200 Y (2000) CNC High Power Turning Centre & Full Function Machining Centre.
S/No 146162. With Mazatrol PC Fusion 640MT Control.
|
Highest bid: £22,000
12 Days 17h
Bidding ends on 18 Sep at 3:00pm BST
|
Item Description
Max swing over cross slide 660 mm dia. Max machining dia 540 mm. Max bar dia (chuck) 65 mm. Traverses X = 530 mm. Y = 140 mm. Z (turret) = 1045 mm. B axis 225 deg. C axis 360 deg. Main Spindle speed 5,000 rpm. Spindle power 22 kw. Milling Spindle speed 6,000 rpm. Milling spindle power 7.5 kw. Tool shank KM63. Chuck dia 200mm. Bar feed 1.5 meter Hydrafeed. Bar feed max bar diameter 65mm. Through spindle diameter 65mm. With 80 tool ATC, 3 Jaw Chuck, Tool Setting Arm, Parts Catcher, Coolant system 70 bar temperature controlled. Swarf Conveyor & Filtermist.
Additional Equipment & Options
Overload Detection
Automatic Parts Catcher
Signal Tower-Operation End Light
Bar Feed Interface Kit
X Y Z Axis Pitch Error Compensation
C Axis Pitch Error Compensation
Milling Spindle Synchronised Tapping
Automatic Pecking Cycle With Load Detection
Interface Set
EIA/ISO Option Package
Magnum Coolant Prep
Work Measuring System MP10 Probe
Chip Conveyor Prep
Multifeed Ml1b 3-80 Bar Loader
Pratt Burnerd 210mm A2-6 HSQC Chuck
Hainbuch QC Collet Chuck 65mm Capacity
Changeover Tool
Swarf Management System With 70 Bar Pump
Chip Bucket
Spin Window
| Location | Wimborne, Dorset |
|---|---|
| Reference | #3529980 |
Auction Information
|
Flight Refuelling - Phase 2
|
