Closure Sale - CNC Pressbrake, Laser Cutting Equipment, Forklifts, Fabrication & Workshop Equipment
Starts: 28 September 2026 at 17:00 BST
Ends: 21 October 2026 at 15:00 BST
Assets availble due to the relocation of the business to the USA. Key lots include CNC machinery, laser and cutting equipment, pressbrakes, forklifts, saws, planers, welders, compressors and workshop equipment. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 38 of 38 lots
- LOT 1
![site]()
2021 Morgan Rushworth XPE CNC 3100/100 CNC Pressbrake With ESA Bend CNC Touch Screen Controller
Bending Power 100 Tonne. Bending Length 3,100mm. 'Y' Axis Approach Speed 75mm/sec. 'Y' Axis Bending Speed 10mm/sec. 'Y' Axis Return Speed 75mm/sec. 'X' Axis Travel 750mm. 'R' Axis Travel 160mm. Stroke 240mm. Daylight 505mm. Motor Power (2) 5.5kW. Nominal Power (Excluding Options) 21kW. With 2 Back Gauge Fingers, 2 Sheet Support Arms & Foot Switch. S/No. B28015 (2021). - LOT 2
![site]()
Bystronic Bylaser 4400 Laser Source, Donaldson Torit DCE DFPRO 4-SPRK-R Dust Extractor & Ernst Furrer WKL430 Cooling Unit
Laser Type CO₂ Gas Laser. Continuous Laser Power 4,400W (4.4kW). Wavelength 10.6µm (10,600nm). Pulse Frequency 1 To 2,500Hz. Circular Polarization. Beam Ø20mm. S/No. 30005767 (2007). Donaldson S/No. 57102830 (2007). Ernst Furrer S/No. 0430.005/14878 (2007). With 4 Sick Safety Light Guards. - LOT 3
![site]()
JCB Teletruk TLT30D TCR Diesel Telescopic Forklift
Maximum Lift Capacity 3,000kg. Maximum Lift Height 4,000mm. Load Centre 500mm. With Side Shift, Solid Tyres & Adaptive Load Control. Weight 4,900kg. S/No. 1541255 (2012). - LOT 4
![site]()
JCB Teletruk TLT35D Diesel Telescopic Forklift
Maximum Lift Capacity 3,500kg. Maximum Lift Height 4,400mm. Load Centre 500mm. With Side Shift & Solid Tyres. Weight 5,200kg. S/No. 1175642 (2007). - LOT 5
![site]()
Gau Jing GN-5S-230E 5 Spindle, 4 Sided Planer & Moulder With Roller Conveyor
Planing Width 10-230mm. Planing Thickness 7-160mm. Feeding Speed 6-60m/min (Inverter Controlled). Minimum Length of Cut 120mm. Infeed Table Length 1,800mm. Feed Roller Diameter Ø 140mm. Spindle Speed 6,000rpm. 1st Bottom Spindle Ø125-160mm. Vertical Spindles Ø100-180mm. Horizontal Spindles Ø100-200mm. Last Bottom Spindle Ø100-250mm. S/No. 10008011 (2011). Conveyor Dimension 2,000 x 430mm. - LOT 6
![site]()
Stenner VHM 36 Heavy Duty Vertical Bandsaw With Roller Conveyors
Maximum Cutting Height (Depth of Cut) 406mm. Table Dimension 905 x 810mm. Fence Capacity 230mm. Roller Conveyor Dimension 2,000 x 430mm. With Air Brake. - LOT 7
![site]()
Centauro Compact Heavy Cut CO-600HD Vertical Bandsaw
Saw Wheel Ø600mm. Maximum Cutting Height 600mm. Maximum Cutting Width (Throat) 580mm. Motor Power 2.9kW. Wheel Speed 715rpm. Table Size 810 × 580mm. Table Height From Ground 900mm. Blade Dimensions 4,580 x 35mm Dust Extraction Port Ø100mm. S/No. 32981 (2021). - LOT 8
![site]()
Wadkin Bursgreen Super 400 Surface Planner
Table Width 400mm. Table Length 2,600mm. Table Height From Floor 800mm. Cutterblock Speed 4,200rpm. S/No. S400/77268. - LOT 9
![site]()
Pilous Alligator HD280LR Horizontal Bandsaw With Roller Conveyors
Max Capacity Round 90° 235mm, Square 90° 230mm, Rectangle 90° 280 x180mm. Round -45° 165mm, Square -45° 145mm, Rectangle -45° 185 x 80mm. Round +60° 115mm, Square +60° 80mm, Rectangle +60° 115 x 80mm. Round +45° 185mm, Square +45° 165mm, Rectangle +45° 185 x 100mm. Blade Dimension 2,710mm x 0.9 x 27mm. Speed Range 40-80m/min. Motor Power 1.4kW. S/No. 123/22/0487 (2022). Roller Conveyor Dimensions 2,060 x 430mm & 3,000 x 600mm. - LOT 10
![site]()
Power System G-TEC 18.510-500 DF Rotary Screw Air Compressor With 500L Mounted Air Receiver
Working Pressure 10bar. Power 18.5kW. Delivery 2,500L/min. Voltage 400V. S/No. 5536760001 (2021). - LOT 11
![site]()
Fini Plus 1508-500 Rotary Screw Air Compressor With 500L Mounted Air Receiver & Mikropor D-MKE-155 Air Dryer
Working Pressure 8bar. Power 15kW. Delivery 2,150L/min. Voltage 400V. S/No. 5662560001 (2021). Mikropor Air Dryer S/No. P110858196 (2024). - LOT 12
![site]()
2022 Warco GH1322 Gap Bed Centre Lathe
Ø160mm 3 Jaw Chuck. Swing Over Bed Ø330mm. Swing Over Cross Slide Ø185mm. Swing in Gap Ø476mm. Spindle Bore Ø38mm. Height of Centres 165mm. Distance Between Centres 500mm. Spindle Speeds Range (8) 70–2,000rpm (Main Motor 2hp). Spindle Nose D1-4 Camlock. Tailstock Taper MT3. Metric Threads 32 pitches (0.4 – 7 mm), Imperial Threads: 32 pitches (3.5 – 56 TPI). S/No. 2250283 (2022). - LOT 13
![site]()
2022 Warco WM-16 Bench Milling Machine With 2 Axis DRO
Table Dimension 700 x 180mm (3 'T' Slots). Throat 160mm. Axis Travel 'X'=500mm, 'Y'=183mm, 'Z'=255mm. Quill Stroke 50mm. Variable Speed Range 50-2,250rpm (750W Motor). Spindle Taper MT2. Voltage 240V. S/No. 440 (2022). - LOT 14
![site]()
Floor Mounted Industrial Work/Storage Tent With Lighting
Approx Overall Dimensions L20 x W15 x H11m. - LOT 15
![site]()
Wadkin GD220 (GD 5) Heavy-Duty, Compact 5 Head Through Feed Planer moulder with Roller Conveyor
Maximum Finished Work Size 220mm Width x 120mm High. Infeed Straightening Table Length 2m. Cutterblock/Spindle Speed 6,000rpm (2.5kW Motor). Spindle Ø40mm. Variable Feed 6-28m/min. roller Conveyor Dimension 2,000 x 430mm. S/No. 001627. - LOT 16
![site]()
Genie Boom Genie Z-45/25J Articulated Electric Boom Lift
Maximum Working Height 15.94m. Horizontal Outreach 7.65m. Up-And-Over Clearance 6.73m. Lift Capacity 227kg. Platform Jib Length 1.52m With 135° Vertical Rotation. Platform Rotation 160° to 180° Hydraulic Rotation. Turntable Rotation 355° Non-Continuous. - LOT 17
![site]()
Lincoln Electric Powertec i320C Advanced Inverter MIG/MAG And STICK Compact Welder With Torch & Leads
Input Voltage 400V (3-Phase, 50/60 Hz, ±15%). Input Current / Power 19.6A Input Current/ approx. 10.3 kVA-14.7kVA Range Depending On Duty Cycle. Welding Output Range 10–320A. Rated Output 320A At 40% Duty Cycle. Wire Feed Speed 1–22 m/min. - LOT 18
![site]()
Lincoln Electric Powertec i320C Advanced Inverter MIG/MAG And STICK Compact Welder With Torch & Leads
Input Voltage 400V (3-Phase, 50/60 Hz, ±15%). Input Current / Power 19.6A Input Current/ approx. 10.3 kVA-14.7kVA Range Depending On Duty Cycle. Welding Output Range 10–320A. Rated Output 320A At 40% Duty Cycle. Wire Feed Speed 1–22 m/min. - LOT 19
![site]()
Lincoln Electric Powertec i320C Advanced Inverter MIG/MAG And STICK Compact Welder With Torch & Leads
Input Voltage 400V (3-Phase, 50/60 Hz, ±15%). Input Current / Power 19.6A Input Current/ approx. 10.3 kVA-14.7kVA Range Depending On Duty Cycle. Welding Output Range 10–320A. Rated Output 320A At 40% Duty Cycle. Wire Feed Speed 1–22 m/min. - LOT 20
![site]()
Kemppi Mastertig MLS 2300 AC/DC With Torch & Leads
Connection Voltage 1~ 230 V (-15% to +15%), 50/60 Hz. TIG Load Capacity (40% ED) 230 A / 5.7 kVA. TIG Load Capacity (100% ED): 170 A / 3.9 kVA. MMA Load Capacity (40% ED) 180 A / 6.0 kVA. MMA Load Capacity (100% ED): 120 A / 3.7 kVA. Welding Range (TIG) 3 A / 10.0 V to 230 A / 19.2 V. Welding Range (MMA) 10 A / 20.5 V to 180 A / 27.2 V. - LOT 21
![site]()
Jasic Pro Tig 200 AC/DC Pulse TIG and MMA Welder With Torch, Leads & Regulator
Input Voltage AC 230V ±15%, 50/60 Hz. Rated Input Current (TIG) Approx. 40A max (Ieff: 17A). TIG Current Range 5A – 200A (DC), 20A – 200A (AC). MMA Current Range: 10A – 160A (DC), 20A – 160A (AC). Duty Cycle (@ 40°C) TIG 200A @ 35% / MMA 160A @ 40%. No-Load Voltage 60–65V. Power Factor 0.93. - LOT 22
![site]()
Esab Rogue ET201iP Pro TIG and MMA Welder With Torch, Leads, Carry Bag & Regulator
Input Voltage 115V – 230V ±15%, 1-phase, 50/60 Hz. Current Range 10–200A. TIG/Stick Rated Output (230V) 200 A at 25% Duty Cycle; 129 A At 60% Duty Cycle; 100 A At 100% Duty Cycle. Open Circuit Voltage (OCV) 78 VDC. - LOT 23
![site]()
Corona 130A/1 Pillar Drill
Rise & Fall Table Dimension 330 x 380mm (2 'T' Slots). Throat 170mm. Speed Range 113-1,460rpm. Spindle Taper MT2. With Foot Switch & Spindle Guard. - LOT 24
![site]()
Vacuum Lifting Company QX500B 4 Pad Vacuum Lifter
Capacity SWL 500kg. Overall Dimensions L1,800 x W1,080mm. S/No. 3635 (2023). - LOT 25
![site]()
Floor Mounted SWL 1 Ton Jib Crane
Yale 1 Ton Chain Hoist. Approx Span 4,000mm. Approx Height Under Beam 3,000mm. With Pendant Control. - LOT 27
![site]()
- LOT 28
![site]()
- LOT 29
![site]()
- LOT 30
![site]()
- LOT 31
![site]()
- LOT 32
![site]()
- LOT 33
![site]()
- LOT 34
![site]()
Jasic Pro Cut 45 Plasma Cutter With Torch & Leads
Input Power AC 95V – 265V, 50/60Hz (Wide Voltage / Dual 110V/230V). Input Current 31A (at 115V) / 23A (at 230V). Input Power Capacity 5.1 kVA. Amperage Range 20A – 45A. Clean Cutting Capacity 15mm. Severance Cutting Capacity 20mm. Power Factor (PFC): 0.99 (Energy-Saving).
Essential Information
General Information
- Auction Dates
- Starts: 28 September 2026 at 17:00 BSTEnds: 21 October 2026 at 15:00 BST
- Site Address
- 63 Wallage LaneCrawleyRH10 4NQUnited Kingdom
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 26 October 2026 at 09:00 GMT - 13 November 2026 at 17:00 GMTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationAnais Tournois69 Middle Street
Brighton
Please Select
BN11AL
United Kingdom [email protected]+44 1273 224466