industrial factory

Presses

What is in the Press category?

The Press category includes all Forging Presses, Arbor Press, Blanking Press, Coining, (Mint Coining) Press, Cut-Off Press, Deep Throat Press, Die Cutting Press, Die Tryout & Spotting Press, Dished & Flanged End Spinning Press, Double & Triple Action Press, Drawing Press, Extrusion Press, Fin Press, Fine Blanking Press, Gap Frame (OBS) Press, H-Frame Press, High Speed Production Press, Hot Stamping Press, Hydraulic Press, O.B.I. Press, Straight Side Press, Straightening Press, Transfer Press.

Press Machinery currently available

Filtering

(Showing 75 of 75 items)
Search
Country
  •  site
    Framo PAS.800X2500.800T Press with Omron NS12-TS01B-V2 Interactive Display Panel & Control (2012)
    Fully Operational 14 Ram/800 Tonne Press; (12) Rams 180/125 & (2) Rams 125/100; Dimensions of Working Area Approx 800mm x 2500mm; Maximum Opening Approx 600mm; Specific Pressure 40kg/cm2; Specific Pressure of work 108.84kg/cm2; Temperature ...
  •  site
    Bentley Vertical Power Press M Series Model M80
    Capacity 80 ton. Bottom Plate Dimension 970 x 610mm. Ram Dimension 410 x 310mm. Throat 310mm. Stroke 1-5". Strokes Per Minutes 45. Slide Adjustment 3". With Front & Side Guarding. S/No. 286.
  •  site
    Steco 200 Ton 'C' Frame Vertical Hydraulic Press
    Top Plate Dimension 1,000 x 600mm. Bottom Plate Dimension 1,340 x 600mm. Approx Throat 400mm. Cylinder Ø200mm. With Sick Safety Curtain Guarding, Ram Surround Guarding & Pendant Control.
  •  site
    Sharp 350kn Vertical Hydraulic Press
    Top Plate Dimension 915 x 535mm. Bottom Plate Dimension 1,600 x 900mm. Approx Throat 760mm. Cylinder Ø400mm. With Sick Safety Curtain Guarding, Surround Guarding & Pendant Control.
  •  site
    Mobile Baltec 33Kn HKPL Manual Pneumatic Bench Press
    WPM Fixture Plate 1,500 x 175mm. Approx Throat 200mm. S/No. 80500 (2001).
  •  site
    Ward Forsyth 50 Ton Vertical Hydraulic Press Model VO 50 S
    Plate Dimension 675 x 470mm. Throat 230mm. Cylinder Ø90mm. With Foot Pedal. S/No. 691143.
  •  site
    Mobile Baltec 33Kn HKPL Manual Pneumatic Bench Press
    WPM Fixture Plate 1,500 x 175mm. Approx Throat 200mm. S/No. 17226 (2014)
  •  site
    Norton No.6 Flypress On Steel Fabricated Table
    Throat 150mm. Distance Under Ram 230mm. Distance Between 'T' Slots 230mm.
  •  site
    Costa Garcia, Ciata P-150/H, 50 Tonne Manual Press (2013)
    75mm Dia Ram; 1400mm Max Distance Under Ram; (8 Hole) Adjustable Height Frame, 10mm - 900mm; Serial Number 1300001.
  •  site
    Beutler Nova C630 kN Vertical Hydraulic Press With Data Plus 200 Control
    Nominal Force 630k. Rated Power 4kW. Stoke 40-120 min-1. Top Plate Dimension 470 x 340mm. Bottom Plate 820 x 580mm. Throat 260mm. Ram Dimension 340 x 220mm. S/No. M0067/65/227/04 (2004).
  •  site
    Mobile Baltec 33Kn HKPL Manual Pneumatic Bench Press
    WPM Fixture Plate 1,500 x 175mm. Approx Throat 200mm. With Foot Switch. S/No. 80472 (2001).
  •  site
    press + demagnetizer
    - Approx. 100 Kg - Origin: Suisse / Switzerland - Loading Charges / Frais de chargement: 70 EUR - Site: Av. du Technicum 42 - 2400 Le Locle - SUISSE
  •  site
    EMG 6 T press
    Distance between table and ram 200 mm - Gooseneck 120 mm - Number of cycles per minute 240 - Ram adjustment 0 to 30 mm - Ram bore Ø26H7 x 40 mm mm - Motor power 0.5 KW - Maximum air consumption 0.2 l. - Table surface 450x220x30 mm - Dimensi...
  •  site
    Press brake TENSOL 8-1,25 HY
    Maximum sheet length 8000 mm - Maximum thickness 1.5 mm - 15 KW motor - Approx. 5100 Kg - Origin: Suisse / Switzerland - Loading Charges / Frais de chargement: 800 EUR - Site: Route de la Plaine 45 - 1580 Avenches - SUISSE
  •  site
    2001 Aida Bliss PMX-L2-3000(1)-215-120 Power Press Plus Associated BHP Decoiler, Leveller & Stacker
    Aida Bliss Press Details: Serial Number B2903-0002; Slide Stroke 100mm, 40-120 Strokes Per Minute (no Load); Die Height 430mm; Slide Adjustment 100mm; Slide Area (Left-Right x Front-Back) 2150mm x 1200mm; Bolster Area (Left-Right x Front-Ba...
  •  site
    Minster Tranemo Model DPAH-400 400-Metric Ton Hydraulic Downacting Straight Side Press
    Minster Tranemo Model DPAH-400 400-Metric Ton Hydraulic Downacting Straight Side Press, 125-Metric Ton Die Cushion Force, 15-Metric Ton Ejector Force, 19.7" Slide Stroke, with 72" x 39-1/2" Bed Area, 30" Opening, Sick FGSE 900-111 Safety Li...
  •  site
    Clearing 50-16793TP 400-Ton Hydraulic Downacting Straight Side Press
    Clearing 50-16793TP 400-Ton Hydraulic Downacting Straight Side Press, with Air Cushion, 40" Max Shut Height, 48" Shut Height of Slide on Bed, 28" Min. Shut Height, 18" Stroke of Slide, 12-1/2 Strokes Per Minute, 1084" x 65" Bed Area, 19" Wi...
  •  site
    Beckwood 500-Ton Straight Side Down-acting Hydraulic Press,
    Beckwood 500-Ton Straight Side Down-acting Hydraulic Press, 84" x 48" Bed Area, 24-1/2" Window, Black-Max Safety Light Curtain, E-FSG Press Monitor, Allen Bradley Panelview 1000 PLC Operator Interface, S/N: 32057
  •  site
    USI Industries 200-Ton OBI Press, Air Clutch, Air Cushion
    USI Industries 200-Ton OBI Press, Air Clutch, Air Cushion, 8" Stroke, 27-1/2" Shut Height, 5" Adjustment, 32 SPM, 54" x 36" x 5" Bolster Plate, Complete with Link Lite Black Max Safety Light Curtain, Link OmniLink 805 PLC Operator Interface...
  •  site
    Accudyne Frank N Former 800-Ton 4-Post Hydraulic Downacting Press
    Accudyne Frank N Former 800-Ton 4-Post Hydraulic Downacting Press, 98" x 34" Between Tie Bars, (2) Central Downacting Hydraulic Rams, Side Mounted Hydraulic Rams, 160" x 120" x 8" Bolster Plate, Link-Site Black Max Safety Light Curtain, Lit...
  •  site
    Taccone 2,000-Ton 4-Post Downacting Hydraulic Press, with Side Rams
    Taccone 2,000-Ton 4-Post Downacting Hydraulic Press, with Side Rams, 84" x 30" Between Tie Bars, 84" x 24" Bolster Plate, 60" Opening, (4) Center Mounted Rams, Floor Mounted Hydraulic Power Unit, Parker Intensifier (Comes with Rebuilt Spare...
  •  site
    Sunex Model 5220 20-Ton H-Frame Shop Press
    Sunex Model 5220 20-Ton H-Frame Shop Press, 24" Between Centers, A/N: 20-Ton Press
  •  site
    Sunex Model 5220 20-Ton H-Frame Shop Press
    Sunex Model 5220 20-Ton H-Frame Shop Press, 24" Between Centers, A/N: 20-Ton Press
  •  site
    Minster No. 5 45-Ton OBI Press, Air Clutch
    Minster No. 5 45-Ton OBI Press, Air Clutch, 3" Slide Stroke, 2-3/4" Slide Adjustment, 28" x 18" Bolster Plate, Complete with Link OmniLink 805 PLC Operator Interface, Link Lite Black Max Safety Light Curtain, Dual Finger Touch Cycle Start,...
  •  site
    2018 Baileigh Air Press, 50-Ton Capacity H-Frame Shop Press
    2018 Baileigh Air Press, 50-Ton Capacity H-Frame Shop Press, SN: 120355088, #30706
  •  site
    Consolidated No. 1 Kick Press
    Consolidated No. 1 Kick Press , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    Littell 1,000-LBS. Capacity No. 10 Centering Reel
    Littell 1,000-LBS. Capacity No. 10 Centering Reel S/N S-2171-65 , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Wittek Model 6MS7 Straightener
    Wittek Model 6MS7 Straightener S/N 1030 , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Lot 12-Drawer Cabinet & Press Hold Down
    Lot 12-Drawer Cabinet & Press Hold Down , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 142039
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 142039, Located 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Johnson 43 Ton No. 4-1/2 FW O.B.I. Press, 4" Stroke, 4" Slide Adjustment, 10" Shut Height, 16" x 28" Bed, 2-1/2" Bolster, Air Operated Clutch
    Johnson 43 Ton No. 4-1/2 FW O.B.I. Press S/N 51028, 4" Stroke, 4" Slide Adjustment, 10" Shut Height, 16" x 28" Bed, 2-1/2" Bolster, Air Operated Clutch , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    30" Pallet Style Coil Reel
    30" Pallet Style Coil Reel , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Rapid-Air Model C3 3" Pneumatic Feed S/N 142338
    Rapid-Air Model C3 3" Pneumatic Feed S/N 142338, Located 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 140668
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 140668, Located 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Lot Press Tender Cart w/ Contents
    Lot Press Tender Cart w/ Contents , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Perkins 22-Ton Model 22-S C-Frame Press, 1-1/2" Stroke, 2-1/2" Ram Adjustment, 7-1/4" Shut Height, 1-9/16" Shank, 12" x 22" Bed Area, Freestanding Control
    Perkins 22-Ton Model 22-S C-Frame Press S/N 45650, 1-1/2" Stroke, 2-1/2" Ram Adjustment, 7-1/4" Shut Height, 1-9/16" Shank, 12" x 22" Bed Area, Freestanding Control , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Bliss 35-Ton OBI Press **Nonfunctioning per owner**
    Bliss 35-Ton OBI Press S/N N/A, 3" Stroke, 2-1/2" Slide Adjustment, 10-3/4" Shut Height, Air Clutch **Nonfunctioning per owner**, Located at Steck Mfg. 1115 S. Broadway Street, Dayton, OH 45417
  •  site
    Kick Press, Manufacturer Unknown
    Kick Press, Manufacturer Unknown , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    Cooper Weymouth 18" Stock Straightener, 18" Width, 9 Roll
    Cooper Weymouth 18" Stock Straightener S/N V1891569B, 18" Width, 9 Roll , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    TRS Tubular Rivet & Stud Style 20EE Rivet Machine S/N 3405
    TRS Tubular Rivet & Stud Style 20EE Rivet Machine S/N 3405 , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    National Rivet Model 2400F 2-Head Rivet Machine
    National Rivet Model 2400F 2-Head Rivet Machine S/N 477, Air-Hydraulics Model SAF 5 Protectoswitch S/N 21759 , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    2017 Uniflex Type KS 6.2_C.2_MVA Calibration Press, 50 Ton Crimping Force, C.2 Control, 55mm Max. Crimping Range
    2017 Uniflex Type KS 6.2_C.2_MVA Calibration Press S/N 45603 (2017), 50 Ton Crimping Force, C.2 Control, 55mm Max. Crimping Range, +25mm Opening, 95mm Opening without Dies, PBK 239 Type of Dies, 5.5kW 3-VAC Dirve, 1000mm L x 1000mm W x 1700...
  •  site
    Perkins 15-Ton Model 15-S C-Frame Press, 1-1/2" Stroke, 2-1/4" Ram Adjustment, 7-3/4" Shut Height, 1-9/16" Shank, 10" x 20" Bed Area, Freestanding Control
    Perkins 15-Ton Model 15-S C-Frame Press S/N 43925, 1-1/2" Stroke, 2-1/4" Ram Adjustment, 7-3/4" Shut Height, 1-9/16" Shank, 10" x 20" Bed Area, Freestanding Control , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Federal 45-Ton Model 45 OBI Press, 3" Stroke, 120-Strokes Per Min, 10" Throat Depth, 2-1/2" Ram Adjustment, 11" Die Space, 18" x 28" Bed Area, Freestanding Control, Rapid Air Stock Feed
    Federal 45-Ton Model 45 OBI Press S/N 45287 (1974 est.), 3" Stroke, 120-Strokes Per Min, 10" Throat Depth, 2-1/2" Ram Adjustment, 11" Die Space, 18" x 28" Bed Area, Freestanding Control, Rapid Air Stock Feed , Located At: 130 Prairie Lake...
  •  site
    Stamtec 110-Ton Model G2-110-H Open Back Double Crank Gap Frame Press w/ Coe Model CPRF-S112 Press Feeder, Coe ServoMaster 3 Touch Pad Control, Coe Model CPR-4018 Uncoiler, Weddington Model Sona-trol Coil Sensor.
    Stamtec 110-Ton Model G2-110-H Open Back Double Crank Gap Frame Press S/N 0266 (1994), 4.33"-Stroke, 50-100-S.P.M., 17.126"-Die Height, 3.94"-Ram Adjustment, 5.1"- Bolster Thickness, 70.8" x 25.6" Bolster Area (L-R x F-B), 55.1" x 19.7"- Sl...
  •  site
    30" Pallet Style Coil Reel
    30" Pallet Style Coil Reel , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Rapid-Air Model C3 3" Pneumatic Feed S/N 149339
    Rapid-Air Model C3 3" Pneumatic Feed S/N 149339, Located 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 140734
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 140734, Located 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Lot (2) Presses c/o Famco Model 8 Kick Press w/ Cast Iron Base & Greenerd No. 3 Arbor Press
    Lot (2) Presses c/o Famco Model 8 Kick Press w/ Cast Iron Base & Greenerd No. 3 Arbor Press , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    Rapid-Air Model C3 3" Pneumatic Feed S/N 139624
    Rapid-Air Model C3 3" Pneumatic Feed S/N 139624, Located 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Arku 9.8" Portable Stock Straightener
    Arku 9.8" Portable Stock Straightener , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Minster 32-Ton Model B1-32 Double Geared Gap Frame Press, 24" x 15" Bolster L.R.-F.B, 400-800 Strokes Per Min, 1.5" Stroke, 2.25" Slide Adjustment, 11" Shut Height, Air Clutch, Freestanding Control
    Minster 32-Ton Model B1-32 Double Geared Gap Frame Press S/N B1-32-20588, 24" x 15" Bolster L.R.-F.B, 400-800 Strokes Per Min, 1.5" Stroke, 2.25" Slide Adjustment, 11" Shut Height, Air Clutch, Freestanding Control , Located At: 130 Prairie...
  •  site
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 142038
    Rapid-Air Model A2W 1-1/2" Pneumatic Feed S/N 142038, Located 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    2015 Haeger 6-Ton Model HP6-B Insertion Press, 6-Ton Capacity, Haeger Modular Autofeed System
    Haeger 6-Ton Model HP6-B Insertion Press S/N 624 (2015) 6-Ton Capacity, Haeger Modular Autofeed System , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    36" Pallet Style Coil Reel
    36" Pallet Style Coil Reel , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Fred J. Swaine No. 3 Kick Press **Broken Steel Stand See Photos**
    Fred J. Swaine No. 3 Kick Press **Broken Steel Stand See Photos** , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    Morris Model 10-M Kick Press w/ Cast Iron Base, Small Bench-Top Hand Press
    Morris Model 10-M Kick Press w/ Cast Iron Base, Small Bench-Top Hand Press , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    24" Pallet Style Coil Reel
    24" Pallet Style Coil Reel , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Dake 75-Ton Model 75H Adjustable Bed H-Frame Manual Hydraulic Press
    Dake 75-Ton Model 75H Adjustable Bed H-Frame Manual Hydraulic Press S/N 149136, 44" Between Housings , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Bliss 45-Ton Model C-45 OBI Press, 3" Stroke, 3" Slide Adjustment, 12-1/4" Shut Height
    Bliss 45-Ton Model C-45 OBI Press S/N H70243 (1986 est.), 3" Stroke, 3" Slide Adjustment, 12-1/4" Shut Height , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Morris Model 10-M Kick Press, Cast Iron Base
    Morris Model 10-M Kick Press, Cast Iron Base , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    Marlco Bench Press
    Table Dimension 350 x 350mm. Distance Between Columns 370mm. Distance Under Ram 375mm.
  •  site
    Royersford Excelsior No. 10 Metalworking, Forming & Stamping 2.5 Ton Kick Press, Cast Iron Base
    Royersford Excelsior No. 10 Metalworking, Forming & Stamping 2.5 Ton Kick Press, Cast Iron Base , Located At: Milton Industries 4500 Cortland St. Chicago, IL 60639
  •  site
    Perkins 22-Ton Model 22-S C-Frame Press, 1-1/4" Stroke, 2-1/2" Ram Adjustment, 10" Shut Height, 1-9/16" Shank, 22" x 12" Bed Area, Freestanding Control
    Perkins 22-Ton Model 22-S C-Frame Press S/N 40258, 1-1/4" Stroke, 2-1/2" Ram Adjustment, 10" Shut Height, 1-9/16" Shank, 22" x 12" Bed Area, Freestanding Control , Located At: 130 Prairie Lake Road, Unit C, East Dundee, IL 60118
  •  site
    Minster 45-Ton No. 5 OBI Press, 28" x 18" Bolster L.R.- F.B., 45-90 Strokes/Minute, 3" Stroke, 2.75" Slide Adjustment, 10.75" Shut Height, Air Clutch, Freestanding Control
    Minster 45-Ton No. 5 OBI Press S/N 5-13892, 28" x 18" Bolster L.R.- F.B., 45-90 Strokes/Minute, 3" Stroke, 2.75" Slide Adjustment, 10.75" Shut Height, Air Clutch, Freestanding Control , Located At: 130 Prairie Lake Road, Unit C, East Dunde...
  •  site
    Hare '12.BS' 12 Tonne Hydraulic Press
    Approx 150mm Stroke; Table Size 500mm x 370mm; Serial Number 7540013; Interlocking Guard;
  • Image not available
    Image not available
     site
    Eames No. 3 Heavy-Duty Floor Type Mandrel Press
    Eames No. 3 Heavy-Duty Floor Type Mandrel Press, Located at Zeeline 1209 32nd Avenue, Spencer, IA 51301 **Delayed Removal Will be available early April 2024**
  •  site
    Alfred Raith (Alfra) APS 120 Hydraulic Puncher with SC 05-11 Elektro Hydraulic Pump on Mobile Trolley
    Maximum Hole 24mm; Max Thickness 16mm; Jaw Depth 110mm; Punching Force 44 Tonnes; Stroke 25mm; Plus: Alfra SC 05-11 Single Acting Pump, Max Pressure 750 Bar; 1100 Watt Motor;
  •  site
    Hare '63HP' Hydraulic Press 63 Tonne Capacity (1988 - Refurbished 1994)
    Stroke Approx 150mm; Size of Table 900mm x 650mm; Safety Distance 150mm; Fast/Slow & Both Stroke; Run on Distance Approx 20mm; Run on Time 49MS; (1 Pair) 'SICK' C4000 Light Curtains & Safety Cage; Swan Neck Bolster; Max Top Tool Weight 315k...
  •  site
    Geka Puma '55/E-500' 55 Tonne Capacity Hydraulic Punching Ironworker (1996)
    Maximum Capacity 40mm Dia x 10mm Thick; Approx 500mm Throat; Guide Arm; Foot Pedal Control; Dimension of Table Approx 550mm x 500mm; Serial Number 1552;
  •  site
    Geka 'Puma 110 SD' Hydraulic Punching Machine, 110 Tonne Capacity with Geka Semipaxy 2569 Control (2012)
    Punch Power of 110 Tonnes; Max Capacity of 40mm x 20mm; Throat Depth 750mm; Automatic 'X' & 'Y' Axis; Max Stroke 80mm; Working Height Approx 1050mm; Motor Driven Stocks; 3 Metre Electro Magnetic Rails; Foot Control; Flattening Heads; Niasa ...
  •  site
    Kingsland '115DPX' 115 Tonne Capacity Double Plunge Hydraulic Punching Press
    Includes Kingsland Digital Read-Out (For Repair); Bending Capacity: 250mm x 22mm Flat Bar; Approx 600mm Throat Depth; Table Dimensions Approx 1500mm x 500mm; Serial Number 235900;
  •  site
    Norton 10 Tonne Hydraulic Press
    Approx 140mm Stroke; Table Size 500mm x 400mm; Approx 240mm Throat; Approx 90mm Dia Die;
  •  site
    Heim 70-Ton Model 7.A. O.B.I. F. O.B.I. Press
    Heim 70-Ton Model 7.A. O.B.I. F. O.B.I. Press S/N 2186 *Subject to Owner's Approval* , Located at G3 Machining 915 E Oakland Ave, Bloomington, IL 61701
  •  site

Manufacturers

Manufacturers that are normally found in this category are Aida, Atlantic, Bentley Bliss, Blow, Bruderer, Bystronic, Chin Fong, Cincinnati, Clearing, Dake, Danly, Denison, Eitel, Erie, Federal, Fielding, Hannifin, Hare, Hugh Smith, Komatsu, Lake Erie Lauffer, LVD, Macrodyne, Minster, Muller, Neff, Niagara, Pacific, Phoenix, Reiss, Rhodes, Schuler, Seyi, Stanko, Verson, Warco, Yangli.

Press Equipment Auctions

How Can I Pay For My Items?

Paying for your items couldn’t be easier. We accept bank transfers for any sale, but unfortunately, we do not accept credit cards or cheques. All payment information can be found on your invoice.

HOW TO PAY ONCE AN ITEM HAS BEEN WON

Once the auction or item has closed, if you have been successful, you will be notified by email. Payment for items won is due immediately. Invoices are available online in the 'My Invoices and Payments' section.

Payment methods we accept for UK sales are:

  • Bank Transfer
  • Debit Card Payment

For USA & EU sales we require invoices to be paid by wire transfer.

PLEASE NOTE WE DO NOT ACCEPT CREDIT CARDS OR CHEQUES

*Cleared funds must be received prior to goods being released

PAYMENT OF SALES TAX

Sales tax is payable at the prevailing rate on all goods purchased. For sales made out of the UK, VAT is charged on both the hammer price and buyers premium. If goods are subsequently removed or exported out of the UK, VAT can be refunded on the hammer price providing sufficient proof of export is supplied to Apex. This only applies to goods that have left the UK within three months of the auction date.

I’ve Paid My Invoices; How Do I Collect My Items?

Our staff are on-site to supervise and control removals only, they are not permitted to move equipment or assist with the removal in any way. Apex Auctions thanks you for your cooperation in helping to keep yourself and others safe while on-site and for aiding us in the timely removal of goods from the site.

If you are planning to use a Courier Service or Pallet Line to collect your goods/lots - Please forward our Full Terms & Conditions to them. They must be able to: Prepare / Disconnect / Handle / Remove / Box / Palletize / Lift / Load your items from the auction site - Your Cooperation with this will save you time & cost.

Access will only be granted to buyers and their contractors/agents once the account has been settled in full by way of cleared funds.

Access may be declined if the collection is not booked in with the Site Manager. You'll find their details on your invoice.

Full information can be found in the sale information section of the sale.

Can I Change My Contact Details?

Sure, head to "Your Account" and select "My Settings". Here it's possible to change or update your personal information and preferences. You won't be able to update your email address. To do this, you'll need to email [email protected] from your new email address and request to update it; please include your username and previously linked email address so that we can locate your account.