Surplus CNC Machinery & Inspection Equipment – Featuring Doosan & Nakamura Machining Centres
Starts: 14 April 2025 at 16:00 BST
Ends: 21 May 2025 at 15:00 BST
Surplus machinery and equipment no longer required by leading precision engineering business.
Share:
Showing 5 of 5 lots
- LOT 1
2006 Doosan Mynx-750 Vertical CNC Machining Center with Fanuc Series 21i-MB Control
Table Dimension 1,600 x 750mm (6 x 17mm T Slots at 125mm Centre). Maximum Table Load 1,500kg. Axis Travel 'X'=1,500mm, 'Y'=760mm, 'Z'=650mm. Rapid Feed 'X/Y' Axis 30 m/min, 'Z' Axis 24 m/min. Maximum Spindle Speed 12,000 RPM (Motor 10.0kW). Spindle Nose BT40. 30 Station ATC. S/No. MYNX750065 (2006). - LOT 2
2006 Doosan Mynx-750 Vertical CNC Machining Center with Fanuc Series 21i-MB Control
Table Dimension 1,600 x 750mm (6 x 17mm T Slots at 125mm Centre). Maximum Table Load 1,500kg. Axis Travel 'X'=1,500mm, 'Y'=760mm, 'Z'=650mm. Rapid Feed 'X/Y' Axis 30 m/min, 'Z' Axis 24 m/min. Maximum Spindle Speed 12,000 RPM (Motor 10.0kW). Spindle Nose BT40. 30 Station ATC. S/No. MYNX750054 (2006). - LOT 3
2002 Nakamura-Tome TW-10 Twin Turret Twin Spindle Slant Bed Turning Center with Fanuc Series 18-T Control
Crawford Type D Collet Chuck Ø34mm Bore. SMW Autoblock Ø170mm 3 Jaw Power Sub-Chuck. Maximum Turning Ø180mm. Maximum Turning Length 154.9mm. 2 x 12 Station Turrets with 12 Rotating Tool Facility. Distance Between Centres 765mm. Maximum Spindle Speed 6,000rpm. Spindle Motor 5.5kW. S/No. W106301 (2002) - LOT 4
Cincinnati Milacron LK G-80C Computerised Measuring Machine CMM with NMC-200 Controller, Computer and Software
Granite Dimensions (W)3,350 x (D)1,900 x 500mm. Offcentre Ø210mm Through Hole For Long Components. Securing Points Equidistant 250mm. Bed to Bridge Height 1,180mm. Renishaw PH10 3 Axis Motorised Probe. CMM Software. Axis Travel 'X'=2,500mm 'Y'=1,500mm 'Z'=1,000mm. Repeatability 0.0030mm. - LOT 5
Baty International R770 Profile Projector with Quadra-Chek 2000 Digital Read Out
Ø700mm Screen With 90˚ Cross Lines and Chart Clips. Cast Iron 600 x 200mm Workstage with 2 x 12mm Slots at 50mm Centres. Manual 'X' and 'Y' Movement. Powered 'Z' Movement. 3 Workstage Lights. 10x Magnification Lens. Workstage Angles ±15˚.
Essential Information
General Information
- Auction Dates
- Starts: 14 April 2025 at 16:00 BSTEnds: 21 May 2025 at 15:00 BST
- Site Address
- Hillhouse business centreBourne RoadThornton-CleveleysLancashireFY5 4QDUnited Kingdom
- Viewing Days
- By Appointment OnlyViewing Strictly by Appointment
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 26 May 2025 at 09:00 BST - 06 June 2025 at 16:00 BSTClearance Strictly by Appointment.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationAnais Tournois69 Middle Street
Brighton
Please Select
BN11AL
United Kingdom [email protected]+44 1273 224466