DCM Machinery Ltd (Precision Machinists)

Max Swing Over Bed 600mm. Swing over Saddle 550mm. Max Turning Diameter 330mm. Max Workpiece Length 500mm. Traverses X = 250mm. Z = 580mm. Y = 100mm. B = 580mm. C = 360 deg (0.001 Increments). Turret with 12 Stations. S/No P250SY0392. Hydra...

Turret with 12 Stations. S/No P23M2252. Hydrafeed Multifeed ML1B Short Magazine Bar Feed S/No 004578

Max Swing Over Bed 400mm. Recommended Turning Dia 210mm. Max Turning Length 330mm. Traverses X = 210mm Z = 420mm. Turret with 12 Stations. S/No 850054. With Hydrafeed Multifeed MX1B Short Magazine Bar Feed S/No 5442

Turret with 12 Stations. Collet Chuck with Collets. S/No SG-717. With Samsys Type MUS 2000 - Multisam 2000 CNC Bar Feed S/No 342 - New 2000

Twin Sauter Type 0.5.480.510 - 12 Station Turrets. See Additional Documents for more Information. S/No R1A V6 BA2

Table 1120mm x 510mm. Traverses X = 1020mm. Y = 510mm. Z = 510mm. ATC Capacity 20 Tools. Spindle Nose 40BT. S/No NCAOH0107

Table 965mm x 406mm. Traverses X = 762mm. Y = 406mm. Z = 508mm. ATC Capacity 21 Tools. Spindle Nose 40BT. S/No 9708863

Table 965mm x 406mm. Traverses X = 762mm. Y = 406mm. Z = 508mm. ATC Capacity 21 Tools. Spindle Nose 40BT. S/No 9409908

Table 950mm x 460mm. Traverses X = 610mm. Y = 460mm. Z = 510mm. ATC Capacity 16 Tools. Spindle Nose 40BT. Speeds 60 to 6000RPM. S/No 15000J - 1990

Table 1473mm x 304mm Spindle Nose 40 Int with Power Draw Bar. Speeds 70 - 3600 RPM. S/No 7916

Table 1219mm x 254mm With Power Long & Cross Feed. Spindle Nose R8. Speeds 60 - 4200 RPM. S/No 3567

Granite Surface Area 1525mm x 795mm. Distance Between Columns Approx 700mm. Approx Height Under Cross Rail 600mm. With Renishaw MH10M Probe. Note: To remove this machine it will require the dismantling of a Partition Wall - Which Must be Re...

Max Swing over Bed 381mm (15") x 762mm (30") B.C. Spindle Speeds 35 to 1500RPM. S/No 145911

With 3 Jaw Chuck & Loose Tooling. S/No SK140317

Capacity Approx 200mm with Roller Tracking & Spare Saw Blades. S/No 71 422

Speeds 50 to 2550RPM. With 4 Way Tool Post (Requires Attention). S/No 27-12044-T

With Quantity of Collets

Throat Approx 150mm. Speeds 475 to 4260RPM. S/No 27949

Blade Diameter 300mm. Automatic In Feed. Feed Stroke Approx 600mm. Pneumatic Down Feed

With Collet Chuck, Hand / Lever Operated Cross Slide. Speeds 750 - 1800 - 3000RPM

Max Pressure 8 bar. Running Hours 39,204. With Cooler & Air Receiver. S/No 707-006302-0204

Approx Internal Dimensions 900mm x 750mm x 700mm.

S/No 51937

Hand / Lever Operated Table Feed. Table Area 635mm x 125mm. Spindle Speeds 85 - 1400RPM. S/No 6320

Throat Approx 150mm. Speeds 475 to 4250RPM. S/No 23055

Bar Capacity 16mm. Spindle Bore 17mm Dia. Max Turning Length 80 & 150mm. Spindle Speeds 485 to 5450RPM. S/No 27440

240 Volts Single Phase. Wheels 200mm Dia x 25mm

SWL 1100lbs. S/No 693208

With Collets. Max RPM - 400

Barrel Size Approx 650mm x 350mm x 350mm

Requires Attention

Capacity 304mm x 152mm (12" x 6"). S/No 10089

Throat Approx 127mm

Throat Approx 75mm

240 Volts Single Phase. With 1 Grinding Wheel & 1 Brush

With 1 Grinding Wheel & 1 Brush

240 Volts Single Phase.

Suitable for Lots 6, 7 & 8

Suitable for Lots 6, 7 & 8

Approx Dimensions: 1080mm x 750mm x 1050mm High

Approx Dimensions: 800mm x 750mm x 1100mm High

Approx Dimensions: 600mm x 600mm x 1030mm High

Approx Dimensions: 590mm x 665mm x 820mm High

With 3 Rolls of Solder

240 Volt Single Phase

Inspection Recommended

Inspection Recommended

Inspection Recommended

Approx Dimensions: 1370mm x 510mm x 880mm High

Approx Dimensions: 1370mm x 510mm x 880mm High

Approx Dimensions: 1370mm x 510mm x 880mm High

Inspection Recommended

240 Volt Single Phase. Speeds 530 to 3830 RPM. 12mm Capacity Drill Chuck. Throat Approx 165mm. S/No 68494

240 Volt Single Phase. Speeds 530 to 3830 RPM. 12mm Capacity Drill Chuck. Throat Approx 165mm. S/No 30055

110 Volts

Sizes: 50 to 75mm & 75 to 100mm

240 Volt Single Phase - Belt Width 25mm

Sizes: 0 to 1" / 1" to 2" / 2" to 3" / 3" to 4" / 4" to 5" & 5" to 6"

Includes: Mitutoyo Digital 300mm, M&W Digital 300mm & Mitutoyo 450mm Standard

Includes: Depth & External Micrometers, Gauge Blocks, DTI, Oil Refractor etc

Dimensions: 305mm x 205mm x 80mm Thick

Dimensions: 610mm x 460mm x 100mm Thick