Engineering Machine Shop Business Closure - Final Clearance

NOTE: Not available for collection until the end of July as needed on site till then. Nominal Load 2 Tonnes. Centre of Gravity 500mm. Lifting Height 4m. Turning Radius 2.05m. Hoisting With/Without Load 0.6m/s. Lowering With Load 0.5m/s. Eng...

Bed Size 1,240 x 550mm. Axis Travel 'X'=1,000mm, 'Y'=508mm, 'Z'=460mm. Maximum Load 800kg. Maximum Spindle Speed 5,000rpm. 30 Tool ATC. Spindle Taper ISO 50. Spindle Power 15kW. Machine Dimensions (W)6,350 x (D)2,735 x (H)3,000mm. S/No. 816...

11kW Motor. 68CFM

Swivel Table Dimension 482 x 482mm. Throat 612mm. S/No. 13435.

Table Dimension 330 x 195mm & 270 x 195mm. Belt Width 150mm & Ø250mm. S/No. A111461 (2011).

Wheel Ø152mm. Wheel Speed 2,800rpm. Voltage 440v.

Approx Dimensions L1,045 x W650 x H955mm.

30 - 110mm

KSJ-10H-60-P and S1-301612-110-40-40-P

UNC, UNF, BSP and Metric

1 X 70 mm diameter by 2.5 m - 1 X 30 mm diameter by 3.1 m - 1 X 60 mm diameter by 0.75 m - 40 mm diameter by 0.58 m

1 X 4 -inch by 1/2 inch flat X 3.32 m - 1 X 80 mm x 10 mm flat I 2.4 m - 1 X 60 mm x 12 mm flat by 2.44 m - 1 X 1 1/4 inch X 1 inch flat X 2.53 m - 1 inch X 1/8 inch flat by 1.27 m - 1 X 45 mm diameter by 3.09 m - 1 X 50 mm diamete...

1 X 1/2 inch diameter by 2.32 m - 1 X 1 inch diameter by 3.22 m - 2 inch diameter by 0.55 m - 1 X 1 3/8 inches diameter by 0.71 m - 1 X 1 3/8 inches diameter by 0.50M - 1X 2 3/4 Inch diameter by 0.37 m

All 25 mm diameter 26 × 1.2 m to 1.6 m approximately

1x 200 mm x 6 mm x 2.4 m - 1 x 200 mm x 6 mm x 1.74 mm - 304 stainless 50 mm x 6 mm x 3.16 m - 40 mm x 25 mm x 0.34m - 817M40T (EN24T) 30 mm diameter X 2.54 m

1 x 1 inch diameter x 2.55 m - 1 x 1 inch diameter x 1.43 m - 1 x 1 inch diameter by 0.3 m - 1 x 21/4 inch diameter x 0.1m - 1 x 2 3/4inch x0.8m - 1 x 2 1/4 inch diameter x 1 1/4 inch diameter x 0.37 m - 1 x 2 inch diameter x 1 inch d...

With back, shelfs and strip light

With number 6 record vice

Ideal for making jigs and fixings

1 X 2 1/2 inch diameter X 0.45 m 1 X 2 1/2 inch diameter X 0.26 m - 212A42 (EN8DM) 1 X 3 inch diameter X 0.44 m

257 mm x 180 mm (top) 25 7 mm x 227 mm (base)

3 X 1.31M 1 X 1.12M 2 X 0.43M

610 mm x 355 mm x 920 mm

Made in West Germany

154 mm x 25 mm x 0.6 2M

1 X 6 1/8 inches X 1 inch X 0.58 m 1 X 6 inches X 2 1/8 inches X 0.17 m - EN36B round 8 1/4 inch diameter X 3 inches - 6082T6 aluminium 1 X 8/2 inch diameter X 3 inches 1 X 4 3/4 inch diameter X 1 1/2 inches - 230M07 (...

(Box 18'' x 8 1/4'' x 8'')

(Box 22'' x 17'' x 8'')

2440mm x 415mm x 920mm - 1220mm x 630mm x 920mm

With rolls of rap - 1 x 4'' & 2 x 3''

Model B 3/8'' - 5 1/2'' capacity

Holders 1 x SL1604 - 1 X SL1606 - 1 X SL2008 - underused inserts. - 4 x ELIH4-04R010L16 - 2 x ELIH4- 04R010L21 - 1 x ELIH6-06R015L16 - 2 x ELIH8- 08R020L15 - 1 x BLIH6-W160L16

From M4 to M 12+ some bearings, O-rings and 2 fixed wheels

6x10mm - 6x25mm - 5x25mm - 6x75mm plus quantity of internal circlips 50mm x2mm - 45x1.7 - 25x1.2mm

1020 x620 x1020 complete with record number 2 vice.

490x405x1070mm

590x405x1070mm

1.2m long with an internal loading space of402mm x 350mm

1000 mm x 450 mm 750 mm

12 inch and 18 inch range.

100 - 125mm - 125-150mm

200-225mm & 175-200mm

8 inch to 12 inch range.

7 of metric and 2 of Imperial

0-150mm range

Range 12.7 mm to 54 mm - Moore and Wright internal micrometre range 2 inches to 7 1/2 inches - Set of small hole gauges range 3 mm to 13 mm

With setting standard and extensions. Range of 12 mm to 20 mm

Oxford petition 333 – 703 magnetic base with Mitutoyo plunger dial indicator range 0-0.250 inches

Kennedy 150 mm (6 inch) engineers square

3 Scotch Pads - selection of used oil stones +2 diamond homes - quantity of thrust washers and bushes - part role of Atorn brown Alox Cloth P80 grit 40mm wide - 2 boxes of 400 grit wet and dry abrasive paper ( 1 full box and one with...

(See attached image of plate for details) comes with accessories as shown in final image.