GE Steam Power Service- La Courneuve

Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item. NOTE: GE to Approve All Offers Prior to Apex Final Invoicing. Only Reputable Machinery Removers who can Provide RAMs and Documentation that meet GE Steam Power Requirements are Permitted to Work on this Site. Access will be at the Site Managers Full Discretion. Veuillez voir la section Information sur la vente pour plus d’informations sur les frais supplémentaires éventuels lors de l’achat d’un article. REMARQUE : GE doit approuver toutes les offres avant la facturation finale d'Apex. Seuls les déménageurs de machines réputés qui peuvent fournir des RAM et de la documentation répondant aux exigences de GE Steam Power sont autorisés à travailler sur ce site. L'accès est laissé à l'entière discrétion du responsable du site.

Ended: 7th June 2023 13:00
  •  site
    LOT 1
    1982 TOS VARNSDORF WHN138A Boring Machine
    Serial number: WHN138A-0917 Boring milling machine from TOS VARNSDORF from 1982 Dimensions of machines : 7000 x 7000 x 3500 mm Max axis movements : X = 2000 mm; Y = 2000 mm; Z = 1250 mm C is not an automated axis, just a position axis. (3...
    Sale has ended
  •  site
    LOT 2
    Parallel lathe H. Ernault Somua Jupiter 830 (1968)
    Serial number: 5008 Parallel lathe from H. Ernault Somua from 1968. Capacity : Max Diameter = 830mm / Max Length = 3000mm / Max weight = 3200 kg Max rotation speed = 500 RPM Power = 11 kW The dimensions of the lathe are with the protection...
    Sale has ended
  •  site
    LOT 3
    Cylindrical grinding machine GER RHC-1000 (1989)
    Serial number: 89/2052 Make: GER TALLIERES AROCENA S.A. Second-hand cylindric grinding machine GER RHC-1000 : Max diameter = 355mm; Max working length = 1000mm; Dimensions of grinding machine = 3650 X 1900 X 1900 MM; Dimensions of whole set...
    Sale has ended
  •  site
    LOT 4
    Milling machine from ALCERA, model 803
    Maximum movements per axis : Axis X : 800 mm; Axis Y : 300 mm; Axis Z : 500 mm Table surface : 1200 x 200 mm Speed of spindle : 40 to 2000 RPM Automatic feed : 11 to 950 mm/min Cone type for spindle : SA 40 The machine was not working befo...
    Sale has ended
  •  site
    LOT 5
    Centre holes grinding machine Technica-centre (1958)

    Make: ATELIERS R.M.O. Centre holes grinding machine Technica-centre : Machine used to machine the centre holes on ends of shaft Dimensions of the machine : 1500 x 800 x 800 mm Max Dimensions of parts machined on this machine : Diameter 1...

    Sale has ended