Wärtsilä Valves Ltd

Started: 05 December 2017 at 09:00 GMT
Ended: 08 February 2018 at 15:00 GMT
Equipment Available as Surplus to Requirements of Ongoing Business. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item.
  • site
    LOT 1
    HNK (2009) Model VTC-14/16 CNC Vertical Turning Centre / Vertical Boring Machine. With C axis & Live Spindle / Driven Tools. Fitted with Fanuc 18i-TB Control
    Table / 3 Jaw Power Chuck Dia. 1400mm. Max Dia Swing 1600mm. Max Height of Workpiece 1200mm. Max Table Load 8000kg. Max Table Speed 360 RPM. Milling Spindle Nose 50BT. S/No 09932
    Sale has ended
  • site
    LOT 2
    Dahlih (2006) Model DL-MCH-630 - 4 Axis Twin Pallet CNC Horizontal Machining Centre. With Fanuc 0i-MC Control.
    Rotary Pallet (B Axis) Area 630mm x 630mm. Spindle Nose 50 DV/Cat. Max Spindle Speed 6000RPM. With 60 Station Automatic Tool Changer. Renishaw Spindle Probe. S/No 3003020014
    Sale has ended
  • site
    LOT 3
    Doosan Model S670LM Turning Centre / CNC Lathe. With Fanuc 18-T Control
    Max Swing 850mm. Distance Between Centre 1850mm. With Driven Tools. 12 Position Turret. Tool Setter. 380mm Dia 3 Jaw Chuck. S/No LNS-1002
    Sale has ended
  • site
    LOT 4
    Doosan Model Z290SM Turning Centre / CNC Lathe. With Fanuc 18-T Control & Iemca VIP 70/15 Short CNC Bar Feed
    With Sub Spindle & Driven Tools. Max Swing 460mm. Distance Between Centre 600mm. With Upper & Lower 12 Position Turrets. Parts Catcher. 250mm 3 Jaw Chuck & 150mm 3 Jaw Chuck on Sub Spindle. S/No LXD-1039
    Sale has ended
  • site
    LOT 5
    Colchester Electronic Mascot CNC / Manual Straight Bed Centre Lathe with GE Fanuc 20-T Control
    Swing over Bed 433mm x 2000mm B.C. (17" x 80"). Swing Over Cross Slide 267mm. Note: Requires Attention - Control Fault. Inspection Recommended. S/No EC0019 - 1995
    Sale has ended
  • site
    LOT 6
    Fanuc Model Robocut Alpha - OC CNC Wire Cut EDM. With Fanuc 16-W Control
    Tank Area Approx 720mm x 550mm. S/No P9740C530-1997
    Sale has ended
  • site
    LOT 7
    Abus Electric Over Head Travelling Crane. With Floor Standing Gantry - (Rails, Bus Bar & Supports). SWL 10 Tonne.
    Single Beam Travelling Crane. With 10000kg Electric Wire Hoist, Pendant Control. Approx Dimensions: Span 16M x Length 47M x 6.9M High Uprights. Gantry with 16 off Uprights. Untested.
    Sale has ended
  • site
    LOT 8
    Abus Electric Over Head Travelling Crane. SWL 5 Tonne.
    Single Beam Travelling Crane. With 5000kg Electric Wire Hoist, Pendant Control. Approx Span: 16M. Untested. Traveling Beam Only.
    Sale has ended
  • site
    LOT 9
    Toyota Model 62-6FDF25 Diesel Powered Fork Lift Truck
    Rated Capacity 2500kg. With Solid Tyres. Frame /No E10930. Untested
    Sale has ended
  • site
    LOT 10
    Mitsubishi Model FG18K Gas Powered Fork Lift Truck with Side Shift
    Rated Capacity 1750kg. With Solid Tyres. S/No EF25A-85523. Untested
    Sale has ended
  • site
    LOT 11
    Vixen Jet Wash Type FL120 Front Loading Rotary Basket Type Parts Washing Machine
    Basket Size 1150mm Diameter x 260mm Deep. S/No 2108
    Sale has ended
  • site
    LOT 12
    Esab Model Warrior 500i CC/CV Mig Welding Machine with Warrior 304w Wire Feed
    With Cooler, Torch, Hoses & Cables. S/No 339-413-0949
    Sale has ended
  • site
    LOT 13
    Lorch Model S8 Pulse Mig Welding Machine with Wire Feed
    With Torch, Hoses & Cables. S/No 4019-2229-0002-5
    Sale has ended
  • site
    LOT 14
    EWM Hightec Type Triton 220AC/DC TGD Power Sinus Tig Welding Machine
    With Cooler, Torch, Hoses & Cables. S/No 0000077585
    Sale has ended
  • site
    LOT 15
    Thermal Dynamics Professional Model Cutmaster 40mm Portable Plasma Cutting Machine
    With Torch, Hoses & Cables. S/No US52255809
    Sale has ended
  • site
    LOT 16
    Kemper Type 8210004 Mobile Welding Fume Extractor with Articulated Arm Duct
    S/No 00127055601
    Sale has ended
  • site
    LOT 17
    Kemper Filter-Master Type 64103 Mobile Welding Fume Extractor with Articulated Arm Duct
    S/No 122465
    Sale has ended
  • site
    LOT 18
    Karcher Professional Model HDS 10/20-4M Mobile Pressure Washer
    With Hose & Lance.
    Sale has ended
  • site
    LOT 19
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 12.4M. Untested. Traveling Beam Only. Plant No OC8
    Sale has ended
  • site
    LOT 20
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 12.4M. Untested. Traveling Beam Only. Plant No OC9
    Sale has ended
  • site
    LOT 21
    Vixen JetAir Type VM36 Shot / Bead Blast Cabinet with Extractor & Recovery Unit
    Internal Dimensions Approx: 900mm x 750mm x 700mm High. S/No 5082
    Sale has ended
  • site
    LOT 22
    Viscontea Model 600 Horizontal Band Sawing Machine
    Capacity 600mm. Fitted with Custom Manufactured Hydraulic Clamping / Rotary Fixture.
    Sale has ended
  • site
    LOT 23
    Qualters & Smith Model 180A Sawmaster Automatic Horizontal Band Sawing Machine
    Sale has ended
  • site
    LOT 24
    Gate Giewont Model 3 Type FWA32M Horizontal / Universal Milling Machine with Motorised Overarm & Swivelling Vertical Milling Head
    Table Size 1600mm x 315mm. Horizontal Spindle 50 Int Taper - Speeds to 2014RPM. Vertical Head 40 Int Spindle - Speeds to 2000RPM. S/No 94/57
    Sale has ended
  • site
    LOT 25
    Colchester Mascot 1600 Gap Bed Centre Lathe - Imperial Machine.
    Swing over Bed 433mm Dia x 1000mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 305mm Dia 3 Jaw Chuck. S/No 7/0201/12170
    Sale has ended
  • site
    LOT 26
    Colchester Triumph 2000 Gap Bed Centre Lathe - Imperial Machine.
    Swing over Bed 390mm Dia x 750mm B.C. Swing in Gap 580mm. Swing over Cross Slide 240mm . S/No 6/0001/07413
    Sale has ended
  • site
    LOT 27
    Lunn Davis Model 15 Keyway Machine - Keyseater - Keyway Broaching Machine
    Table Area 787mm x 508mm. With Loose Tooling & Equipment. S/No LD138
    Sale has ended
  • site
    LOT 28
    Colchester Mascot 1600 Gap Bed Centre Lathe with 2 Axis DRO. - Imperial Machine.
    Swing over Bed 433mm Dia x 1500mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 305mm Dia 3 Jaw Chuck. 400mm 4 Jaw Chuck. S/No 7/0203/16147
    Sale has ended
  • site
    LOT 29
    Colchester Mascot 1600 Gap Bed Centre Lathe with 2 Axis DRO. - Imperial Machine.
    Swing over Bed 433mm Dia x 1000mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 305mm Dia 3 Jaw Chuck. 400mm 4 Jaw Chuck. S/No 7/0203/15970
    Sale has ended
  • site
    LOT 30
    Kitchen & Wade 4’0” E25 Radial Arm Drilling Machine
    Throat Distance Approx 1100mm. Spindle Nose No 4 Morse Taper. Spindle Speeds 40 to 2000 RPM. With Power Rise & Fall Arm. S/No 17672
    Sale has ended
  • site
    LOT 31
    Richmond Consul Radial Arm Drilling Machine with Rise & Fall Swivelling Table
    Throat Distance Approx 900mm. Spindle Nose No 4 Morse Taper. Spindle Speeds 50 to 2000 RPM. S/No 111-00113
    Sale has ended
  • site
    LOT 32
    Murex Model HD100 Powered Welding Positioner with Pendant Control.
    Table Diameter 1560mm. Max Load 5080kg. S/No 0714
    Sale has ended
  • Image not available
    Image not available
    site
    LOT 33
    Spare Lot
    Sale has ended
  • site
    LOT 34
    Boge (2011) Model SF 29-2 Packaged Air Compressor
    Max Pressure 8bar. S/No 5046146
    Sale has ended
  • site
    LOT 35
    CompAir BroomWade Model BTD450 Refrigerant Compressed Air Dryer
    Max Working Pressure 26bar. S/No BTD450/362
    Sale has ended
  • site
    LOT 36
    Kemper Type 8210004 Mobile Welding Fume Extractor with Articulated Arm Duct
    S/No 00127055501
    Sale has ended
  • site
    LOT 37
    Ecoair Model SDA 75A Packaged Air Compressor
    Max Pressure 7.5bar. S/No 2021792
    Sale has ended
  • site
    LOT 38
    Ecoair Model SDA 75A Packaged Air Compressor
    Max Pressure 7.5bar. S/No 2021789
    Sale has ended
  • site
    LOT 39
    Herbert Single Spindle Pillar Drilling Machine
    Spindle Nose No 3 Morse Taper. Speed 106 to 1455 RPM. Rise & Fall Table Area 390mm x 330mm. Throat Approx 190mm. With Power Feeds
    Sale has ended
  • site
    LOT 40
    Butler 10” (254mm) Slotting Machine
    Throat Approx 470mm. Rotary Table 610mm Diameter.
    Sale has ended
  • site
    LOT 41
    Scharmann Model FB85 Table Type Horizontal Boring, Facing & Milling Machine. With 3 Axis DRO
    Spindle Diameter 85mm. Approx Facing Head Dia 605mm. Rotary Table Area 1200mm x 1000mm. Spindle Nose Morse Taper. Note: Requires Attention - Drive Pulley Dismantled. S/No 6971
    Sale has ended
  • site
    LOT 42
    Drummond Electraulic 12 Ton Vertical Hydraulic Press
    Throat Approx 240mm. Table to Ram Face Approx 480mm. S/No ABN 12/513
    Sale has ended
  • site
    LOT 43
    Lumsden Type 30R Heavy Duty 4 Wheel Tool Grinding Machine
    S/No 30R/1175/10824
    Sale has ended
  • site
    LOT 44
    Cincinnati No 2TCG Tool & Cutter Grinding Machine with Motorised Tilting Wheel Head.
    With Motorised Work Head. Left & Right Centres. Dust Extractor. 4 Jaw Chuck. Collets plus Various Loose Tooling & Equipment as Photographed. S/No CT7301-2
    Sale has ended
  • site
    LOT 45
    Wild Barfield Model HW 1610 Electric Furnace.
    Max Temperature 1050 deg C. Approx Internal Dimensions 400mm x 750mm x 280mm High. S/No AM2130P
    Sale has ended
  • site
    LOT 46
    Fabricated Metal Parts Washing Tank with Electric Pump & Foot Pedal
    Wash Area Approx 1000mm x 400mm
    Sale has ended
  • site
    LOT 47
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 10M. Untested. Traveling Beam Only. Plant No OC7
    Sale has ended
  • site
    LOT 48
    Cobal Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 10M. Untested. Traveling Beam Only. Plant No OC6
    Sale has ended
  • site
    LOT 49
    Abus (2014) Electric Over Head Manual Travelling Beam, Hoist & Gantry. SWL 1 Tonne.
    Single Beam. With Abus 1000kg Electric Chain Hoist, Pendant Control (Hoist Only). Approx Dimensions: 4.9M Span x 5M x 3.1M High Uprights. Gantry with 4 off Uprights. Untested.
    Sale has ended
  • site
    LOT 50
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne with 10M Crane Rails - No Supports
    Single Beam Travelling Crane. With 2000kg Electric Chain Hoist, Pendant Control. Approx Span: 10M. Note: Crane Rails Bolted to Building Structure with 6 off Brackets. Untested. Plant No OC8
    Sale has ended
  • site
    LOT 51
    Kone Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only. Plant No DLS2030
    Sale has ended
  • site
    LOT 52
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only. Plant No OC4
    Sale has ended
  • site
    LOT 53
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Chain Hoist, Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only. Plant No OC2
    Sale has ended
  • site
    LOT 54
    The Vaughan Crane Co Electric Over Head Travelling Crane. SWL 2 Tons.
    Twin Beam Travelling Crane. With Hitachi 2 Ton Electric Chain Hoist, Manual Chain & Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only.
    Sale has ended
  • site
    LOT 55
    Cobal Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Chain Hoist, Pendant Control. Approx Span: 6.5M. Untested. Traveling Beam Only. Plant No OC1
    Sale has ended
  • site
    LOT 56
    Herbert Junior Hand / Lever Operated Surface Grinding Machine with Dust Extractor
    Table Area Approx 533mm x 154mm
    Sale has ended
  • site
    LOT 57
    Quantity of BT50 Spindle Tools Suitable for Lot 1
    Approx 32 off. Note: Back End Tool & Pull Stud Only - Does NOT Include Any Cutting Tools / Boring Bars Shown in Photographs.
    Sale has ended