Carringworth Ltd

Major Auction Sale of Quality CNC Machine Tools from Carringworth Ltd - By Order of Mrs Karen Dukes and Mr Robert Birchall of PricewaterhouseCoopers LLP the Joint Administrators of Carringworth Limited. The Administrators act as agents of the company without personal liability. Both are licensed to act as insolvency practioners by the Institute of Chartered Accountants in England and Wales.

Ended: 8th July 2009 14:00
  • site
    LOT 1
    Cincinnati Lamb (2004) V-CNC 500 Vertical Machining Centre. With Fanuc 21i-MB Control
    Complete with Kitagawa 4th Axis Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 2
    Dugard Eagle (2004) 200HT CNC lathe. With Fanuc Series 0i Mate-TB control
    With 208mm Dia 3 Jaw Power Chuck, Tool Setting Arm. Tail Stock
    Sale has ended
  • site
    LOT 3
    Nakamura (2000) TMC-18 CNC Lathe With Fanuc Nakamura Tome Control.
    With 208mm Dia 3 Jaw Power Chuck, 10 Station Turret & Swarf Conveyor.
    Sale has ended
  • site
    LOT 4
    MecWash (2004) Midi 400 Component Wash / De-Greaser with Alan Bradley Viewplus 600 Control.
    Sale has ended
  • site
    LOT 5
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm & Sameca Short Magazine Bar Feed Unit
    Sale has ended
  • site
    LOT 6
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm & LNS Quick Load Short Magazine Bar Feed Unit
    Sale has ended
  • site
    LOT 7
    Cincinnati Lamb (2004) V-CNC 500 Vertical Machining Centre. With Fanuc 21i-MB Control
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 8
    Mollart Drillsprint (1997) "Gun Drill" Deep Hole Twin Head Drilling Machine. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration, Conveyor & Chiller
    Sale has ended
  • site
    LOT 9
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm
    Sale has ended
  • site
    LOT 10
    Cincinnati Milacron (1998) Dart 500 Vertical Machining Centre. With G E Fanuc Series 21i-M Control.
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 11
    Cincinnati Milacron (1997) Dart 500 Vertical Machining Centre. With G E Fanuc Series 21i-M Control.
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 12
    Cincinnati Milacron (1998) Dart 500 Vertical Machining Centre. With G E Fanuc Series 21i-M Control.
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 13
    Radyne (2002) 50TF50LT Induction Hardening Machine
    Complete with F&R Cooling Limited Cooler,
    Sale has ended
  • site
    LOT 14
    Fanuc (2000) Model M-16i - 6 Axis Robotic Parts Loading / Unloading Arm
    Complete with Gudel Linea Track. Fanuc System R-JR Control.
    Sale has ended
  • site
    LOT 15
    Fanuc (2001) Model M-16i - 6 Axis Robotic Parts Loading / Unloading Arm
    Complete with Gudel Linea Track. Fanuc System R-JR Control.
    Sale has ended
  • site
    LOT 16
    Mollart LD500 Drillsprint (1996) "Gun Drill" Deep Hole Twin Head Drilling Machine. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration & Conveyor
    Sale has ended
  • site
    LOT 17
    Cincinnati (1997) Arrow 500 Vertical Machining centre with G E Fanuc Series O-M Control.
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 18
    Cincinnati (1997) Arrow 500 Vertical Machining centre with G E Fanuc Series O-M Control.
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 19
    Radyne (1998) Induction Hardening Machine
    Complete with F&R Cooling Limited Cooler,
    Sale has ended
  • site
    LOT 20
    Fanuc (2001) Model M-16i - 6 Axis Robotic Parts Loading / Unloading Arm
    Complete with Gudel Linea Track. Fanuc System R-JR Control.
    Sale has ended
  • site
    LOT 21
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm
    Sale has ended
  • site
    LOT 22
    Mollart Drillsprint (1998) "Gun Drill" Deep Hole Twin Head Drilling Machine. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration, Conveyor & Chiller
    Sale has ended
  • site
    LOT 23
    Radyne (2002) 50TF50LT Induction Hardening Machine
    Complete with F&R Cooling Limited Cooler,
    Sale has ended
  • site
    LOT 24
    Fanuc (1999) Model ARC Mate 120i - 6 Axis Robotic Parts Loading / Unloading Arm
    Complete with Gudel Linea Track. Fanuc System R-JR Control.
    Sale has ended
  • site
    LOT 25
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Fanuc 18-T Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm
    Sale has ended
  • site
    LOT 26
    Mollart Drillsprint (1997) "Gun Drill" Deep Hole Twin Head Drilling Machine. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration, Conveyor & Chiller
    Sale has ended
  • site
    LOT 27
    Radyne (1998) 60TQ50 Induction Hardening Machine
    Complete with F&R Cooling Limited Cooler,
    Sale has ended
  • site
    LOT 28
    Radyne (1996) 60TQ50 Induction Hardening Machine
    Complete with F&R Cooling Limited Cooler,
    Sale has ended
  • site
    LOT 29
    Fanuc (2000) Model ARC Mate 120i - 6 Axis Robotic Parts Loading / Unloading Arm
    Complete with Gudel Linea Track. Fanuc System R-JR Control.
    Sale has ended
  • site
    LOT 30
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm & Swarf Conveyor
    Sale has ended
  • site
    LOT 31
    Mollart Drillsprint (1999) "Gun Drill" Deep Hole Twin Head Drilling Machine. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration, Conveyor & Chiller
    Sale has ended
  • site
    LOT 32
    Fanuc (2000) Model M-16i - 6 Axis Robotic Parts Loading / Unloading Arm
    Complete with Gudel Linea Track. Fanuc System R-JR Control.
    Sale has ended
  • site
    LOT 33
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm
    Sale has ended
  • site
    LOT 34
    Mollart Drillsprint (1996) "Gun Drill" Deep Hole Twin Head Drilling Machine Type LD2-500. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration, Conveyor & Chiller
    Sale has ended
  • site
    LOT 35
    Radyne (2005) 50TF50LT Induction Hardening Machine
    Complete with 50K/SP Cooler,
    Sale has ended
  • site
    LOT 36
    Radyne (1998) 60TQ50 Induction Hardening Machine
    Complete with F&R Cooling Limited Cooler,
    Sale has ended
  • site
    LOT 37
    Radyne (2004) 50TFP50LT Induction Hardening Machine
    Complete with Cooler
    Sale has ended
  • site
    LOT 38
    Mollart Drillsprint (1997) "Gun Drill" Deep Hole Twin Head Drilling Machine Type LD2. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration, Conveyor & Chiller
    Sale has ended
  • site
    LOT 39
    Cincinnati (1998) Dart 500 Vertical Machining Centre with G E Fanuc Series 21i-M Control.
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 40
    Cincinnati (2000) Dart 500 Vertical Machining Centre with G E Fanuc Series 21i-M Control.
    Complete with Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 41
    Cincinnati (2002) Arrow 500 Series 2 Vertical Machining Centre with G E Fanuc Series 18i-M Control.
    Complete with 4th Axis Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 42
    Mollart Drillsprint (1998) "Gun Drill" Deep Hole Twin Head Drilling Machine. With G E Fanuc Power Mate Control
    Complete with High Pressure Coolant Pumps plus Filtration, Conveyor & Chiller
    Sale has ended
  • site
    LOT 43
    Cincinnati (2004) V-CNC 500 Vertical Machining Centre. With Fanuc 21i-MB Control
    Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 44
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    With C Axis, Twin 12 Station Turrets, Parts Catcher, Tool Setting Arm
    Sale has ended
  • site
    LOT 45
    Cincinnati Sabre 750 Vertical Machining Centre with Fanuc Series 0-M Control.
    Table 863mm x 508mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 46
    Cincinnati (2004) V-CNC 500 Vertical Machining Centre. With Fanuc 21i-MB Control
    With Nikken 4th Axis / Indexing Unit. Table 700mm x 520mm. With 21 Position ATC
    Sale has ended
  • site
    LOT 47
    Addison CB 250A Automatic Horizontal Band Sawing Machine
    Sale has ended
  • site
    LOT 48
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. Inspection Recommended
    Suitable For Spares or Repair. Control Boards Missing
    Sale has ended
  • site
    LOT 49
    Embur (1999) Model 1000 Electro Chemical De-Burr Machine
    Dismantled
    Sale has ended
  • site
    LOT 50
    Mollart Drillsprint (2000) Model LD3-500 "Gun Drill" Deep Hole Three Head Drilling Machine. With G E Fanuc Power Mate Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 51
    Cincinnati Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 52
    Cincinnati Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 53
    Cincinnati Arrow 500 Series 2 Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 54
    Cincinnati Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 55
    Cincinnati (2004) Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 56
    Mollart Drillsprint (1998) "Gun Drill" Deep Hole Two Head Drilling Machine. With G E Fanuc Power Mate Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 57
    Cincinnati (2005) Lamb V-CNC 500 Vertical Machining Centre. With Fanuc 21i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 58
    Cincinnati (2005) Lamb V-CNC 500 Vertical Machining Centre. With Fanuc 21i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 59
    Nakamura Tome TW-10 Opposed Two Spindle, Twin Turret CNC Lathe. With Nakamura Fanuc Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 60
    Cincinnati (2006) Lamb V-CNC 500 Vertical Machining Centre. With Fanuc 21i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 61
    Nikken (2000) 4th Axis Unit with Tail Stock
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 62
    Nissan 20 Model FDO2A200 Diesel Powered Fork Lift Truck
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 63
    Nissan 20 Model FDO2A200 Diesel Powered Fork Lift Truck
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 64
    Cincinnati (2005) Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 65
    Cincinnati (2005) Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 66
    Cincinnati (2005) Lamb CVF-550i Vertical Machining Centre. With Fanuc 21i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 67
    Cincinnati (2006) Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 68
    Cincinnati (2005) Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 69
    Mollart Drillsprint (2004) "Gun Drill" Deep Hole Two Head Drilling Machine. Model LD2-500. With G E Fanuc Power Mate Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 70
    Dugard Eagle (2004) 200 CNC lathe. Model FTL200HT. With Fanuc Series 0i Mate-TB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 71
    Cincinnati (2005) Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 72
    Cincinnati (2005) Lamb CVF-550i Vertical Machining Centre. With Fanuc 18i-MB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 73
    Dugard Eagle (2004) 200 CNC lathe. Model FTL200HT. With Fanuc Series 0i Mate-TB Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 74
    Cincinnati (2002) Arrow 500 Series 2 Vertical Machining Centre with G E Fanuc Series 18i-M Control.
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 75
    Mollart Drillsprint (1997) "Gun Drill" Deep Hole Two Head Drilling Machine. With G E Fanuc Power Mate Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 76
    Kitagawa (2005) Type TT120AEE06 CNC Rotary Table (4th / 5th Axis)
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 77
    Guyson (2003) Cellmate Model 200 Automatic Parts Washing Machine
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 78
    John Wood (2003) JWA Micro - Chemical Deburring Machine. With Beckhoff Control
    This item is subject to a finance agreement. The winning bid on this item is for Vendor consideration only; please do not consider the item successfully purchased until we have confirmation from the vendor.  We would hope to have a dec...
    Sale has ended
  • site
    LOT 79D
    Nikken (2004) Model CNC Z105FA Rotary Table (4th Axis)
    S/No 1009. Used with Lot 60
    Sale has ended
  • site
    LOT 79B
    Nikken (2003) Model 5AX-130FA CNC Rotary Table (4th / 5th Axis)
    S/No 1162. Used with Lot 54
    Sale has ended
  • site
    LOT 79A
    Nikken (2003) Model 5AX-130FA CNC Rotary Table (4th / 5th Axis)
    S/No 1152. Used with Lot 52
    Sale has ended
  • site
    LOT 79C
    Nikken (2003) Model 5AX-130FA CNC Rotary Table (4th / 5th Axis)
    S/No 1163. Used with Lot 55
    Sale has ended
  • site
    LOT 79
    Nikken (2004) Model 5AX-130FA CNC Rotary Table (4th / 5th Axis)
    S/No 1177. Used with Lot 51
    Sale has ended
  • site
    LOT 80
    Kitagawa CNC Rotary Table (4th / 5th Axis)
    No Plate Similar to Lot 80A. Used with Lot 64
    Sale has ended
  • site
    LOT 80F
    Kitagawa CNC Rotary Table (4th / 5th Axis)
    No Plate Similar to Lot 80A. Used with Lot 71
    Sale has ended
  • site
    LOT 80E
    Kitagawa (2004) Type TT120AEE06 CNC Rotary Table (4th / 5th Axis)
    Manufacturing No 040156. Used with Lot 72
    Sale has ended
  • site
    LOT 80B
    Kitagawa (2005) Type MR200RAE03 CNC Rotary Table (4th Axis)
    Manufacturing No 050429. Used with Lot 66
    Sale has ended
  • site
    LOT 80I
    Kitagawa(2000) Type RS100LAHO CNC Rotary Table (4th Axis)
    Manufacturing No E0023. Used with Lot 58
    Sale has ended
  • site
    LOT 80C
    Kitagawa (2005) Type TT120AEE06 CNC Rotary Table (4th / 5th Axis)
    Manufacturing No 050212. Used with Lot 67
    Sale has ended
  • site
    LOT 80H
    Kitagawa(2000) Type RS100LAHO CNC Rotary Table (4th Axis)
    Manufacturing No E0024. Used with Lot 57
    Sale has ended
  • site
    LOT 80G
    Kitagawa CNC Rotary Table (4th / 5th Axis)
    No Plate Similar to Lot 80A. Used with Lot 53
    Sale has ended
  • site
    LOT 80D
    Kitagawa CNC Rotary Table (4th / 5th Axis)
    No Plate Similar to Lot 80A. Used with Lot 68
    Sale has ended
  • site
    LOT 80A
    Kitagawa (2004) Type TT120AEE06 CNC Rotary Table (4th / 5th Axis)
    Manufacturing No 040195. Used with Lot 65
    Sale has ended
  • site
    LOT 81
    HPC (1997) Type TD76 Refrigerant Air Dryer
    Working Pressure 15 Bar
    Sale has ended
  • site
    LOT 82
    Multifeed (1998) Model ML1 Short Magazine CNC Bar Feed
    Sale has ended
  • site
    LOT 83
    Multifeed (1998) Model ML1 Short Magazine CNC Bar Feed
    Sale has ended
  • site
    LOT 84
    Sameca (1995) Model MUZ56 Short Magazine CNC Bar Feed
    Sale has ended
  • site
    LOT 85
    Fork Lift Type Access Platform / Cage
    Untested
    Sale has ended
  • site
    LOT 86
    WBJ Granite Inspection Surface Table. Grade 1BS Size 1200mm x 1200mm
    Sale has ended
  • site
    LOT 87
    Karcher BR 55/60W Battery Operated Floor Scrubber
    With Built in Battery Charger
    Sale has ended
  • site
    LOT 88
    Quantity of Various Metal Fabricated Work Tables & Benches
    Sale has ended
  • site
    LOT 89
    Two off Mobile Oil Dispensers. One with Pneumatic Pump
    Sale has ended
  • site
    LOT 90
    Seven Bays of Boltless Pallet Racking
    In Stores & Various Locations
    Sale has ended
  • site
    LOT 91
    Two off Small Mobile Swarf Skips
    Sale has ended
  • site
    LOT 92
    Four off Mercer Air Operated Dial Type Air Guages
    Sale has ended
  • site
    LOT 93
    Five off Federal Air Operated Dial Type Air Guages
    Sale has ended
  • site
    LOT 94
    Three off Comparator Stands with Quantity of Micrometers
    Sale has ended
  • site
    LOT 95
    Iroscope Engineers Inspection Microscope Model WSI-L
    Sale has ended
  • site
    LOT 96
    Granite Inspection Surface Table. Size 1828mm x 914mm
    Sale has ended
  • site
    LOT 97
    Nikken Twin Head CNC Indexing Unit plus Nikken 4th Axis Unit & Spare Parts
    Sale has ended
  • site
    LOT 98
    Quantity of Sundry Packaging Materials
    Bubble Wrap & Cardboard
    Sale has ended
  • site
    LOT 99
    Pressol Hand Operated Oil Pump
    Sale has ended
  • Image not available
    Image not available
    site
    LOT 100
    Spare Lot
    Sale has ended
  • site
    LOT 101
    Kaeser - HPC (2007) Type TD61 Refrigerant Air Dryer with Oil/Water Seperator
    Pressure 16 Bar. With Air Receiver
    Sale has ended
  • site
    LOT 102
    Daewoo Lynx 200L CNC Lathe. For Spares or Repair
    Machine & Control Parts Missing. Inspection Recommended
    Sale has ended
  • site
    LOT 103
    Six Spindle Inline Drilling Machine
    Three off Herbert Heads & Three off Pollard. One Spindle Requires Attention
    Sale has ended
  • site
    LOT 104
    Pallet Truck - 2000kg Capacity
    Untested
    Sale has ended
  • site
    LOT 105
    Two off Mitutoyo PJ 300 Profile Projectors. One For Spares or Repair Only
    Sale has ended
  • site
    LOT 106
    Mitutoyo Roundtest RA100
    Sale has ended
  • site
    LOT 107
    HPC Plusair Model BS60 Packaged Screw Compressor
    Capacity 7.5 Bar
    Sale has ended
  • site
    LOT 108
    Myford MG12 Hydraulic Cylindrical Grinding Machine
    Diameter Swing 125mm x 305mm B.C.
    Sale has ended
  • site
    LOT 109
    Hirst Model MD100J Demagnetiser with Bowes Metrology Inspection Fixture & PC
    Complete with Workbench
    Sale has ended
  • site
    LOT 110
    Fork Lift Type Tipping Swarf Skip
    Sale has ended
  • site
    LOT 111
    Fork Lift Type Tipping Swarf Skip
    Sale has ended
  • site
    LOT 112
    Fork Lift Type Tipping Swarf Skip
    Sale has ended
  • site
    LOT 113
    Fork Lift Type Tipping Swarf Skip
    Sale has ended
  • site
    LOT 114
    Fork Lift Type Tipping Swarf Skip
    Sale has ended
  • site
    LOT 115
    Fork Lift Type Tipping Swarf Skip
    Sale has ended
  • site
    LOT 116
    Kentruck Pallet Truck
    Untested
    Sale has ended
  • site
    LOT 117
    Colchester Triumph 2000 Gap Bed Centre Lathe. Imperial Machine.
    Swing over Bed 390mm Dia x 1270mm B.C. Swing over Cross Slide 240mm.
    Sale has ended
  • site
    LOT 118
    Draper Model DI6/16 Bench Drilling Machine
    Single Phase
    Sale has ended
  • site
    LOT 119
    Draper 150mm - 6" Double Ended Tool Grinding Machine
    Single Phase
    Sale has ended
  • site
    LOT 120
    Karcher Model BR400 Electric Floor Cleaner
    Single Phase
    Sale has ended
  • site
    LOT 121
    Two off Aluminium Ladders
    Untested
    Sale has ended
  • site
    LOT 122
    Quantity of Various Furniture - Contents of Meeting Room & Offices
    Wood Veneer Tables, Desks Cabinets, Chairs etc. Not IT Equipment or Drinks Machines
    Sale has ended
  • site
    LOT 123
    Siemens Custom Built Inspection Machine
    Sale has ended
  • site
    LOT 124
    Video Inspection Microscope - Baty Type OBZBV1
    With Monitor
    Sale has ended
  • site
    LOT 125
    Custom Built Inspection Machine with Mitutoyo Digimatic Digital Gauge
    Sale has ended
  • site
    LOT 126
    Two off Industrial Vacuum Cleaners - Draper & Aquavac
    Single Phase
    Sale has ended
  • site
    LOT 127
    Easi-Heat 280 Propane Gas Heater
    Single Phase
    Sale has ended
  • site
    LOT 128
    Quantity of Sundry IT / Computer Equipment
    Including - ISDN Cards, Scanners, Power Supplies etc
    Sale has ended
  • site
    LOT 129
    Parts Dipping Tank with Pneumatic Cylinder
    Tank Approx 700mm x 530mm x 450mm Deep
    Sale has ended
  • site
    LOT 130
    Draper & Rexon Bench Drilling Machines
    Single Phase
    Sale has ended
  • site
    LOT 131
    Tesa Profile 30 Projector with PC & Printer
    Sale has ended
  • site
    LOT 132
    Tesa Profile 30 Projector with PC & Printer
    Sale has ended
  • site
    LOT 133
    Eighteen off A&E Pneumatic Dial Type Gauges plus Two off Federal
    Sale has ended
  • site
    LOT 134
    Marpos Quick Read Gauging Fixture / System
    Sale has ended
  • site
    LOT 135
    Florenza Shaft Concentricity Inspection Fixture
    Sale has ended
  • site
    LOT 136
    Crown Granite Inspection Surface Table. Size 1828mm x 1219mm
    Sale has ended
  • site
    LOT 137
    Quantity of Various Metal Fabricated Work Tables & Benches
    Sale has ended
  • site
    LOT 138
    RJH Diamond Wheel Lapping Machine
    Sale has ended
  • site
    LOT 139
    Three off Dell Laser Jet Printers plus Two off Xerox Scanners & Paper Shredder
    Sale has ended
  • site
    LOT 140
    Seba Protective Coating Dipping Pot
    Single Phase
    Sale has ended
  • site
    LOT 141
    NHB Demagnetiser - Opening Approx 350mm
    Sale has ended
  • site
    LOT 142
    Four off Fork Lift Type Tipping Swarf Skips
    Photo Shows One Skip as Sample
    Sale has ended
  • site
    LOT 143
    Boss Pallet Truck
    Untested
    Sale has ended
  • site
    LOT 144
    Norton No 6S Fly Press
    Sale has ended
  • site
    LOT 145
    Furniture Contents of Upstairs General Office
    Wood Veneer Tables, Desks Cabinets, Chairs etc. Not IT Equipment or Drinks Machines
    Sale has ended
  • site
    LOT 146
    Furniture Contents of Upstairs Small Offices
    Wood Veneer Tables, Desks Cabinets, Chairs etc. Not IT Equipment or Drinks Machines
    Sale has ended