Induction Furnace, Blast Booths, Cranes, Crucible Furnaces & Metal Processing Equipment Available from GE Iron Foundry
Featuring: ABP induction furnace, sand hardening mixers, high-capacity bridge cranes, crucible furnaces, sand reclaim system, iron stabilisation system, plus all of the usual ancillary foundry equipment. Equipment available due to closure of the iron foundry facility. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item. NOTE: GE to Approve All Offers Prior to Apex Final Invoicing. Any Bidder MUST and CAN ONLY USE the GE-Approved Riggers
Ended: 17th November 2022 14:00
- LOT 1
![site]()
ABP Germany Type IFM 9/27.0 Pit Type Induction Furnace7908 KW, 204HZ, 2670 Volt, 26169 AMP, 1650° C Maximum Temperature, with (2) 27-Ton Each 20" Diameter Opening, with ABP Type IFM 9 2X845 Volt 50HZ 2X4770 KVA Connected Load Switchgear, Siemens Simatic Touch Panel PLC Operator Interf...Sale has ended 
LOT 1B![site]()
Complete Iron Foundry - Collective Lot Including Lots 1 To 73 InclusiveThis is a Collective Lot Available via bidding.
Sale has ended- LOT 1A
![site]()
Complete Iron Foundry - Collective Lot Including Lots 1 To 73 InclusiveThis is a Collective Lot Available for Pre-Sale Via Make Offer Only.
Sale has ended - LOT 2
![site]()
- LOT 3
![site]()
Blastman Technical Nowa SOL Robotic Surface Blast Booth with Top Running Gantry Type Robotic Grit Blast NozzleApprox Dimensions 29'8" Long, 16' Wide, 20' High Working Capacity with 100-Ton Rail Mounted Transfer Work Table, Interior Lighting, GE Quick Panel View PLC Operator Interface, Side Mounted Man Door, Dust Collection System with Bottom D...Sale has ended - LOT 4
![site]()
Sand Reclaim Recycling System, Complete with Sand HopperWith ECO Instal Technika Ochrony Powietrza Dust Collection System with Blowers, Bottom Discharge, 17" Wide x Approximate 60' Long Elevated Vibratory Conveyor, Magnetic High-Speed Magnet (Over Conveyor), Bucket Elevator Approx. 60' High...Sale has ended - LOT 5
![site]()
2 Pieco Serwus Crucible Type 27-Ton Capacity Post Heating FurnacesLPG Fired Mounted Horizontally on Motorized Rail Cars, Lifting Hook, Power Tilting with manual Wheel, Moro Model MHR552T7R Blowers, Control Cabinet with Siemens Simatic Panel Touch PLC Operator Interface, (2) Digital Temperature Controllers...Sale has ended - LOT 6
![site]()
- LOT 7
![site]()
- LOT 8
![site]()
30-Ton with 8-Ton Capacity Sister Hook Double Girder, Top Running Overhead Bridge Crane, Cab / Radio Control OperatedApprox Span 22m.Sale has ended - LOT 9
![site]()
3.2-Ton Capacity Double Girder Gantry Type Overhead Bridge Crane Top Running, Cab / Radio Control OperatedApprox Span 9m.Sale has ended - LOT 10
![site]()
Wöhr Type DWM 40T/H Sand Hardening MixerWith Articulating Overhead Arm Dispensers, 40 Ton/HR Maximum Capacity 400-Volt, 50HZ, Hardener Mixing Tanks, Pumps, PLC Operator Interface, Mounted on Rail Cars (2008) Into Service in (2009)Sale has ended - LOT 11
![site]()
Wöhr Type DWM 40T/H Sand Hardening MixerWith Articulating Overhead Arm Dispensers, 40 Ton/HR Maximum Capacity 400-Volt, 50HZ, Hardener Mixing Tanks, Pumps, PLC Operator Interface, Mounted on Rail Cars (2008) Into Service in (2009)Sale has ended - LOT 12
![site]()
Wöhr Type DWM 40T/H Sand Hardening MixerWith Articulating Overhead Arm Dispensers, 40 Ton/HR Maximum Capacity 400-Volt, 50HZ, Hardener Mixing Tanks, Pumps, PLC Operator Interface, Mounted on Rail Cars (2008) Into Service in (2009)Sale has ended - LOT 13
![site]()
Floor Mounted Jib Crane SWL 2.5 TonApprox Span 5m. Power Rotation 360° . Electric Wire Hoist. Pendent Control.Sale has ended - LOT 14
![site]()
Hydraulic ClawSale has ended - LOT 15
![site]()
2 Cyrus Rail Mounted Unloading Cars Type FC950/1080 x 4,9003' Wide Opening. Weight 20,700kg. S/No. 1.15.173 (2008).Sale has ended - LOT 16
![site]()
Pieco Surwus Portable Heating Element for over Pit Furnaces, with PLC Operator InterfaceVari-Frequency Drive, 80" Diameter. (2009)Sale has ended - LOT 18
![site]()
IMS Model HY80S 80-Ton Capacity Hydraulic IronworkerCutting Capacity 1-1/4" x 45/64" (32 x 18) Punching, 2-23/64" x 1-5/16" x 3/8" (60 x 40 x 10) Notching, 3-15/16" x 3-15/16" x 3/8" (90° 100 x 100 x 10) Angle Cutting, 1-3/4" Round, 1-5/8&q...Sale has ended - LOT 19
![site]()
CM501 16" Abrasive Chop Saw With Extraction UnitSale has ended - LOT 20
![site]()
Stork Natural Gas Fired Car Bottom Furnace1150° C Maximum Temperature, 18 MBTU / HR Thermal Rating, 100-Ton Capacity, 50KW Short Circuit Rating, 380V / 50 HZ Electrics, 18-KW Rated Electrical, with Siemens Simantic PLC Operator Interface, S/N: FFO5291 (2009)Sale has ended - LOT 22
![site]()
- LOT 23
![site]()
Vetter SWL 1000KG Beam Mounted Jib HoistWith 1000KG Capacity Electric Chain Hoist, Power Rotation, Pendent Control. Approx Span 4mSale has ended - LOT 24
![site]()
Vetter SWL 1000KG Beam Mounted Jib HoistWith 1000KG Capacity Electric Chain Hoist, Power Rotation, Pendent Control. Approx Span 4mSale has ended - LOT 25
![site]()
Vetter SWL 1000KG Beam Mounted Jib HoistWith 1000KG Capacity Electric Chain Hoist, Power Rotation, Pendent Control. Approx Span 5.8mSale has ended - LOT 26
![site]()
Steel Fabricated Lifting Equipment Rack With Quantity Of Chains & HooksApprox Dimensions W9.2 x D2 x H5.25mm.Sale has ended - LOT 27
![site]()
3 Cast Iron Box TablesApprox Dimensions W700 x D800 x H1,015mm, W990 x D800 x H710mm , W730 x D950 x H1,200mm.Sale has ended - LOT 28
![site]()
2 Wall Mounted Rack With Quantity Of ClampsSale has ended - LOT 29
![site]()
Fronius VR4000 Mig Welder With Wire FeederSale has ended - LOT 30
![site]()
Mitsubishi Pallet Truck SWL 2,500kg.Sale has ended - LOT 31
![site]()
- LOT 32
![site]()
(2) 5 Tread Aluminium Steps & Bottle RackSale has ended - LOT 33
![site]()
- LOT 34
![site]()
- LOT 35
![site]()
(3) Aluminium Steps 5,6 & 8 TreadSale has ended - LOT 36
![site]()
- LOT 37
![site]()
4 Swarf SkipsSale has ended - LOT 38
![site]()
- LOT 39
![site]()
(2) 5 Tread Aluminium StepsSale has ended - LOT 40
![site]()
2 Staging Units With LaddersApprox Dimensions W2,200 x D900 x H2,600mm & W2,080 x D990 x H3,000mm.Sale has ended - LOT 41
![site]()
- LOT 42
![site]()
Personnel Lockers With (2) 2 Door CabinetsSale has ended - LOT 43
![site]()
- LOT 44
![site]()
3 Mobile Swarf BinsSale has ended - LOT 45
![site]()
- LOT 46
![site]()
- LOT 47
![site]()
- LOT 48
![site]()
Zarges 5 Tread Step LaddersSale has ended - LOT 49
![site]()
Coil Storage RackSale has ended - LOT 50
![site]()
Mobile 8 Tread LaddersSale has ended - LOT 51
![site]()
- LOT 52
![site]()
Step Ladders & Access PlatformsSale has ended - LOT 53
![site]()
- LOT 54
![site]()
- LOT 55
![site]()
- LOT 56
![site]()
Plastmet Refrigerator Upright Cabinet & Personnel LockersApprox Dimensions W1,000 x D700 x H1,800mm.Sale has ended - LOT 57
![site]()
10 Tread Mobile LaddersSale has ended - LOT 58
![site]()
- LOT 59
![site]()
- LOT 60
![site]()
- LOT 61
![site]()
Quantity Of Swarf Bins & StillagesSale has ended - LOT 62
![site]()
- LOT 63
![site]()
- LOT 64
![site]()
- LOT 65
![site]()
- LOT 66
![site]()
- LOT 67
![site]()
- LOT 68
![site]()
- LOT 69
![site]()
- LOT 70
![site]()
- LOT 71
![site]()
- LOT 72
![site]()
- LOT 73
![site]()
ABP Type IFM 9/27.0 Induction Melting FurnaceType IFM 9/27.0 Induction Melting Furnace, Electrical Connection, Frequency 204 Hz, Nominal Voltage 2670V, 7908 kW, 69861 kVa, 26169 A, Nominal temperature 1650ºC, Charge GG, Charge capacity 28610 kg, Cooling water pressure 0.72 bar...
Sale has ended
