Lixil Africa Krugersdorp (COBRA) Closing Down Sale Auction 1

Engine run time 321h 9m 429 Starts, 500KVA

Machine start, needs battries, working 500KVA

Coolant valve not opening, new valve fitted cost R2294.00. Replace wiper set cost R12 326.00, working,all spares available from Retecon

DMG VERTICAL M/C CEN - CNC DMC 1035 Veco, Spindle was replaced in 2019, working, all spares available from Retecon.

DAEWOO VERTICAL MACH, Daewoo Ace V50 Machining center - Machine was transfer from the Tool room at our Springs branch in 2020 and was not used since. New nylon guide strips was fitted for pallet, working,all spares available from Retecon...

MAHO MILL CNC Milling machine, Machine is not working. Has a power supply problem, not working

DOOSAN I CORE LATHE C17, Bar feeder Needs to be set up properly and aligned, working,all spares available from Retecon

Doosan PUMA 240 MC CNC lathe and BAR FEEDER-PUMA 240 C28, Working, all spares available from Retecon

Daewoo Lynx 210 L CNC Turning Center, Machine requires geometry to be done was reported that machine is not cutting straight and not keeping size, working, all spares available from Retecon

Doosan Puma 240 M

Hitachi Seiki TF20

Doosan Lynx 2010 L, New LED work light fitted, safety glass replaced, working,all spares available from Retecon

Doosan ACE VC 320 CNC, Spindle taper damaged repaired 2019, Spindle bearings making a noise, working, all spares available from Retecon

CNC TURN CENTR & MOTOR Kraft D, Craft D CK0640, Machines are working but have not been in use since beginning 2020

CNC TURN CENTR & MOTOR Craft C CK0640 , Machines are working but have not been in use since beginning 2021

CNC TURN CENTR & MOTOR Craft A CK0640 Machines are working but have not been in use since beginning 2022

Machine history and problems : Machine moving on all axes manually, Spindle not starting due to electrical problem, automatic feed not working.

BRIDGEPORT MILL Milling Machine, All axes are working, Digital readout functional in X & Y, Only the auto feed in X works

All axes are working, Digital readouts working for X & Y, Auto feeds are not working, spindle faulty

Machine is not working, power supply problems, all spares available from Retecon

CY-LI640G,Spindle is running good, all axes in good order no major play, digital readouts are fully functional, all gears and lever movements are in working order, water pump working, working tailstock

Voest Apollo 500, Spindle is running good, all axes in good order no major play, digital readouts are fully functional, all gears and lever movements are in working order, water pump working, working tailstock

Boehringer Goppingen, Spindle is running good, all axes in good order no major play, digital readouts are fully functional, all gears selection is ok, thread cutting is faulty, water pump working, working tailstock

CMZ, Spindle is running good, all axes in good order no major play, no digital readout, all gears and lever movements are in working order, water pump working, working tailstock

Deckel, Fp2 machine is fully functional, all feeds are working, some speed selections not engaging. FP1 machine works manually but can not confirm auto feed.

TR5 41 LATHE T/STORE, Fully functional, all feeds working, threading working, coolant pump faulty.

DIEDESHEIM M/C 397 Slot, Machine fully functional, all feeds working

HEIDENRICH & HARBECK T706, Lathe working, X-axis faulty at a certain spot, water pump working, 3 jaw-chuck

ALZMETAL PEDEST DRIL , Fully functional, up/down working good, spindle running through

SELF FEED DRILL, Fully functional, pneumatic up and down auto cycle, Adjusting table up and down

Rexon, Fully functional, spindle runs through and up down adjustable table

Ingar, Working in manual mode only, wheel needs replacement, all axes moving manualy

Fully functional, spindle runs through and up down adjustable table

TAPPING MACHINE 557, Fully functional, spindle runs through and up down adjustable table

Puma Tapping Machine, Fully functional, has a automatic tap and return activated by a foot switch.

Bauer Horizontal Saw CB2, 659 Clamps, jaws fully functional, Coolant pump is working fine, pipes in good condition

Ingersoll Rand, Model 1993, Working fully, was still supplying production in March 2021, requiers service

Ingersoll Rand, Compressor requiers a major service,

Airdryer functional, only needs a new blow off solinoid valve

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Aprox weighht 550kg, Sample Image, 1 per Lot

Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Aprox weighht 500kg, Sample Image, 1 per Lot

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, No drives or control buttons, wear on v belts and bearings common faults, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, No drive on Right hand side, Some repairs needed, requiers new drives, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Sample Image, 1 per Lot, wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

1 per Lot, no drive on left hand side, Some repairs needed, requires new drives, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

No drive on left hand side, Some repairs needed, requires new drives, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Working, Rosler R 165 EC-KF, 1140mm Dia x 389mm depth lining is still good with lid.

Working, Rosler R 62, 1620mm Dia x 490mm depth, lining still good.

Working, Walther trowel CM 555, 1510mm Dia x 500mm depth, lining good have medium stuck to bottom.

Working, Walther CG 315, 1175mm Dia x 390mm depth, lining still good.

Working, Rosler R 620, 1620mm Dia x 490 depth, lining still good.

Working, Rosler R 620, 1620mm Dia x 490 depth, lining still good.

Working, Rosler R 620 KF, 1620mm Dia x 490 depth, lining still good.

Not Working, Walther CM 555, 1510mm Dia x 500mm depth, lining still good.

Actom, Working

Working

working, Proxys, Valve, Elements, Probes,cylinders

V belts replaced due to wear, mixing blade Wear due to errotion from the sand, working. Regular cleaning prevents build up and prolongs blade life.

Thyristor or fuses blown - working

Thyristor or fuses blown - not working, channel is open circuit on furnace, panel still in working order

Thyristor or fuses blown, not working, channel is open circuit on furnace, panel still in working order

Thyristor or fuses blown, working

Thyristor or fuses blown, working

Quantity x 12: Pots get fiiled with a carbon powder and water mix, fitter with a motor for stirring the mix. Mix is used to give the moulds a carbon coat to prevent the melted metal from sticking to the mould. Pot outside diamentions: 73...

Machine breakdown usually is Proxy, Hydraulic cylinder , valves , heating box elements and probes.

Machine breakdown usually is Proxy, Hydraulic cylinder , valves , heating box elements and probes not working,The one arm is broken off,

Dustmaster, Working

Working

Working

Working

Working