Twyford Precision Engineering (Devon) Ltd

Main Table Area 2200mm x 1100mm. Rotary Table 1000mm x 1000mm. Traverses: X = 2150 mm. Y = 1400mm. Z = 1100mm. B = (Rotary Table) 360 deg. Spindle Nose 50BT. S/No 6052

Controlled Axes: X & Z. Max Turning Diameter 640mm x 1440mm B.C. Max Swing over Bed 750mm. Standard Turning Dia 271mm. . Turret with 12 Stations. With Tail Stock, 380mm Diameter 3 Jaw Chuck. S/No TFL021

Table 1200mm x 450mm. Traverses: X = 1010mm. Y = 500mm. Z = 520mm. ATC Capacity 20 Tools. Spindle Nose BT40. S/No VO510422

Table 1200mm x 450mm. Traverses: X = 1010mm. Y = 500mm. Z = 520mm. ATC Capacity 20 Tools. Spindle Nose BT40. Note that the Control requires attention, viewing recommended

Max Dia Swing 530mm. Max Turning Dia 250mm. Max Turning Length 500mm. Turret with 12 Stations. With 260mm Diameter 3 Jaw Chuck, Quantity of VDI Turret Tooling. S/No T20075

Table 1460mm x 630mm. Traverses: X = 1400mm. Y = 710mm. Z = 660mm. ATC Capacity 20 Tools. Spindle Nose BT50.

Table Diameter 1371mm (54") Max Diameter Swing Approx 1570mm. Distance from Table to Under Side of Cross Rail 609mm (24") S/No 7024-4

Table Diameter 914mm (36") Max Diameter Swing Approx 1219mm. Distance from Table to Under Side of Cross Rail 596mm. S/No 6215-8

Fitted with Universal Milling Head with 50 UNI Spindle Nose. Bed / Table Area 6000mm x 1030mm. Traverses:- Long 4300mm x Ram Cross 980mm x 1700 Vertical.

Table Diameter 1219mm (48") Max Diameter Swing Approx 1574mm. Max Distance from Table to Under Side of Cross Rail 1219mm (48") S/No 5497-7

Capacity:- Max Diameter Swing Over Bed 840mm. Max Distance Between Centres 2000mm. Spindle Speeds 6.9 to 900 RPM. S/No 04-54-062

Swing over Bed 433mm Dia x 2000mm B.C. Swing over Cross Slide 267mm. Swing in Gap 711mm. S/No 7/0205/16267

Swing over Bed 330mm (13") Dia x 1000mm (40") B.C. Spindle Speeds 29 to 2240RPM. S/No 39483-10-72

Table 1371mm x 304mm. Spindle Nose 40 Int. Speeds 70 - 3600 RPM. With Power Table Feed. S/No 8149 - 1997

Cutting Bed Area 4120mm x 2025mm. Max Long Travel 4750mm. Distance Between Columns 2880mm. Cross Travel 2560mm. S/No 93-40-234-01

With 800mm Diameter Rotary Table. Traverses: X = 1000mm. Y = 1000mm. Z = 810mm. Spindle Nose 50DV/Cat with 30 Position ATC. S/No 78-460180-02 - 1981

With 800mm x 800mm Pallets. Spindle Nose 50DV/Cat with 90 Position ATC. S/No 78-941187-02 - 1988

With 800mm x 800mm Pallets. Traverses: X = 1000mm. Y = 1000mm. Z = 810mm. Spindle Nose 50DV/Cat with 30 Position ATC. S/No 78-940684.03 - 1985

Throat Approx 1680mm. Spindle Nose 5 Morse Taper. Speeds 31 - 830 RPM. S/No P33168 - 1974

Table Diameter 500mm. Throat Approx 370mm.

Table Diameter 914mm (36") Max Diameter Swing Approx 1066mm. Distance from Table to Under Side of Cross Rail 482mm. S/No 5027-5

Spindle Dia Approx 89mm. Facing Head Dia Approx 711mm. Main Table Area 1524mm x 914mm. Top Table 1219mm x 1219mm. Traverses Approx - Vertical 1219mm - Cross 914mm. S/No 1052

Capacity Approx 320mm. With Roller Tracking. S/No 22199-1976

Capacity: Approx Max Shaft Length 2100mm x 240mm Diameter

Throat Approx 863mm. Spindle Nose 5 Morse Taper. Speeds 42 - 1130 RPM. S/No P16070

Electromagnetic Chuck 914mm (36") Diameter. With Segmental Grinding Wheel & Coolant. S/No 91LE/227/8294

Table 1066mm x 228mm (42" x 9"). Spindle Nose R8. Speeds 67 to 4600RPM. S/No 235330676S

Capacity 32mm. With Point Thinning, 6 Jaw Chuck & Cams. S/No 980595

Capacity 3". With Quantity of Various Guide Bushes. S/No 6474

Table Area 1168mm x 394mm. All Spindles No 3 Morse Taper Three with Hand Feed One with Power Feed. Spindle Speeds (8) 106 to 2850 RPM. Throat Approx 190mm

S/No 3016

Mounted on Fabricated Metal Bench with 150mm Wide Machine Vice. Machine Capacity 3/4". S/No 99070111 - 1999

S/No 6548/94

Blade 275mm Diameter. Table Size 710mm x 705mm. S/No 275 DS 1612

Stroke Approx 500mm. Distance Between Side Bars 360mm

Blade Diameter 300mm with Coolant

Stroke Approx 355mm. Distance Between Frame 610mm. Bed Area 610mm x 410mm. With Quantity of Bushes.

Capacity Approx 270mm Diameter Swing x 500mm B.C. Wheel Size Approx 500mm Dia x 38mm Wide. With Coolant. S/No BY19326

Swing over Bed 390mm Dia x 1270mm B.C. Swing in Gap 580mm. Swing over Cross Slide 240mm. S/No 6/0004/21266. Saddle Gearbox is Missing.

240 Volt - Single Phase. S/No BS24807

With LF24 Pro Wire Feed & Lincoln Magnum Cooler. S/No P1070200155

With Mag PDE41 Wire Feed. S/No P1040400797

With Mag PDE41 Wire Feed. S/No P1040400786

240 Volt Single Phase

S/No 903768

35 - 190 Amps. No Leads

With HPC TAII Cooler. S/No 1962380005/1067

Capacity 8bar - 15kw. With Cooler & Air Reciever. S/No CA1234186

With PC & Flat Screen Monitor. S/No FO4-02-07-23534

Approx Dimensions of Table: 1828mm x 914mm x 152mm Thick. Height From Floor Approx 840mm.

Approx Dimensions: 610mm x 610mm x 100mm Thick. Height From Floor Approx 830mm.

Spare Lot

240 Volts Single Phase - 10 Amps. S/No 1638

Approx Dimensions: 600mm x 600mm x 850mm High

Approx Dimensions: 600mm x 600mm x 850mm High

Approx Dimensions: 1000mm x 500mm x 1000mm High

Approx Dimensions: 1000mm x 500mm x 1000mm High

Approx Dimensions: 1000mm x 500mm x 1000mm High

With Tracks & Uprights. Span Approx 7.6M. Track Length Approx 9.7M. Height Approx 3.6M. S/No 7223/93.

Approx Dimensions: Radius 4.2M. Over All Height From Floor 3.6M.

Approx Dimensions: Radius 4.5M. Over All Height From Floor 3.3M.

Approx Dimensions: Radius 3.6M. Over All Height From Floor 3.6M.

Approx Dimensions: Radius 4.5M. Over All Height From Floor 3.6M.

Approx Dimensions: Radius 4.5M. Over All Height From Floor 3.3M.

Max Capacity 1400kg. With Side Shift & Charger. S/No H2X335L01237 - 2000

Sizes:- 80mm - 75mm & 70mm

Includes 2 off Archer

Approx Diameters:- 250mm - 210mm & 2 off 200mm

Centre Height Approx 150mm with 160mm Diameter 3 Jaw Chuck

Centre Height Approx 125mm with 160mm Diameter 3 Jaw Chuck

Approx Surface Area 250mm x 190mm

Approx Dimensions: 380mm x 225mm x 300mm

Approx Dimensions: 520mm x 430mm x 640mm

Includes 2 off Box Type & 2 off Plain Angle Plates

Approx Dimensions: 800mm x 800mm x 75mm Thick

Approx Dimensions: 520mm x 430mm x 410mm

Untested

Approx Dimensions: 460mm x 310mm x 230mm

Bottom Table 1520mm x 915mm - Top Table 1065mm x 1065mm

Approx Dimensions 12" High x 3.5" Wide

Approx Dimensions 8" High x 3.5" Wide

Approx Dimensions 6" High x 2.25" Wide

Approx Dimensions 8" High x 2.25" Wide

Approx Dimensions 6" High x 2.25" Wide

Approx Dimensions 12" High x 3.5" Wide

Approx Dimensions 2" High x 2.25" Wide

Approx Dimensions 914mm High x 609mm x 79mm Wide Each

Approx Dimensions 609mm High x 380mm x 69mm Wide Each

Wheels Max Approx 200mm. S/No 1035010318

Wheel Diameter Approx 150mm. S/No 141145

Single Phase

Approx Dimensions: 1220mm x 1220mm x 910mm

Single Phase. S/No 931502981

Approx Dimensions: 1000mm x 500mm x 1000mm High

Approx Dimensions: 1000mm x 500mm x 1000mm High

Approx Dimensions: 1000mm x 500mm x 1000mm High

Approx Dimensions: 1000mm x 500mm x 1000mm High

Mounted on Metal Fabricated Legs. Distance Through Frame 420mm. 140mm Under Ram. Table Size Approx 3660mm x 380mm Wide x 880mm Height from Floor

S/No 06121405/267. Untested

S/No 05111405-1/018. Untested

Approx Dimensions: 3660mm x 1145mm x 200mm Thick

Approx Dimensions: 1225mm x 920mm x 780mm High

Max Width 100mm

1 off 2 Jaw 300mm Dia, 1 off 3 Jaw 300mm Dia & 1 off 4 Jaw 355mm Dia

Capacity Approx 500kg - Untested

Capacity Approx 500kg - Untested

Capacity Approx 500kg - Untested

Capacity Approx 500kg - Untested

Capacity Approx 300kg - Untested

Includes:- Box Section - Tube - Angle - Flat - Round Bar etc

Approx Dimensions: 850mm x 500mm x 550mm Deep

Approx Dimensions: 900mm x 550mm x 440mm Deep

Approx Dimensions: 800mm x 500mm x 550mm Deep

Approx Dimensions: 800mm x 500mm x 550mm Deep

Approx Dimensions: 550mm x 650mm x 450mm Deep

Approx Dimensions: 700mm x 550mm x 750mm Deep (Extended)

Approx Dimensions: 800mm x 500mm x 550mm Deep

Approx Dimensions: 1000mm x 700mm x 500mm Deep

Approx Dimensions: 900mm x 500mm x 800mm High

Approx Dimensions: 1000mm x 500mm x 1000mm High

Approx Dimensions: 900mm x 730mm x 830mm High

Customers are reminded that all holes in the building must be made good after the removal of this lot.

Customers are reminded that all holes in the building must be made good after the removal of this lot.

Includes: External Micrometers, Internal Micrometers, Gauge Blocks, Depth Micrometer, Dial Gauges etc